Weller Erem 110 mm Electronics Diagonal

  • RS Stock No. 239-3900
  • Mfr. Part No. 670EP
  • Manufacturer Weller Erem
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

Straight Tapered Head

These electronics cutters manufactured from high quality machined tool steel. Cutters have a built-in internal stop and integral return spring to prevent blade overlapping and reduce operator fatigue. All cutters are supplied with soft grip foam rubber grips.

//media.rs-online.com/t_line/LD239599-01.gif

Erem 670EP Straight Short Cutters

The 670EP cutters from Weller have a straight short relieved head to provide highly precise cuts with a flush finish. The ergonomic handles allow for reduced fatigue in hands when working over long periods. Made from tough and durable tool steel that makes it suitable for cutting SMD and micro packages up to 0.25 mm. Ideal for cutting μ pitches below 0.5 mm, with a maximum cutting capacity of 0.6 mm for copper wire and 0.5 for medium hardness wire

Features and Benefits

• Protection of electronic components from risks of electrostatic discharge (ESD) • Straight Short Relieved Head
• Ergonomic shaped handles for high comfort
• High Precision Cutters
• Overall length: 110mm
• Weight: 48g

Typical Applications

Cutters are hand tools used to cut through wires and are available in a range of shapes and sizes to suit a variety of tasks and applications. The most common type of cutter head is oval, tapered and angled. The type of cut produced depends on the bevel of the cutter. Semi-flush cutters are more durable and produce a quick cut rough rougher edges, whereas an ultra-flush bevel will produce a much cleaner cut but is susceptible to damage. Cutters are commonly used in applications such as:

• DIY • Industrial
• Construction
• Electronic Installation

Care and maintenance

Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion.

FAQ's

What material is this cutter suitable with?

This cutter is suitable to cut copper wires 0.1 to 0.6 mm precisely.

What is the bevel of this cutter?

The 670EP provides a flush cut, for only mirco pitches under 0.5 mm.

Specifications
Attribute Value
Model Number 670EP
Type Electronics Diagonal Cutters
Overall Length 110 mm
Jaw Length 9.0mm
ESD Safe Yes
Material Steel
Maximum Cutting Capacity 0.6mm
14 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 175.52
(exc. GST)
$ 201.85
(inc. GST)
units
Per unit
1 +
$175.52
Related Products
Compact bolt cutter that delievers 20 times the ...
Description:
Compact bolt cutter that delievers 20 times the cutting force than the hand force applied. The lever-action mechanism ensures an extremely favourable lever ratio with very little friction. Precision cutting edges for soft, hard wire & piano wire Will cut ...
Oblique nipper with narrow head, 45° angled cutting ...
Description:
Oblique nipper with narrow head, 45° angled cutting edges. For precision electronics work, in confined areas with restricted access. MagicSense molded handle with soft-touch surface for extra comfort, grip and safety. Induction-hardened cutting edges, hardness 64-65 HRc.
Tools with precision box joint and captive, low-friction ...
Description:
Tools with precision box joint and captive, low-friction double spring. Special tool steel, oil-hardened and tempered. Mirror polished with excellent corrosion protection. Cutting edge hardness 56 HRCDual component handles for fatigue-free, sensitive work.
Bolt cutter with interchangeable forged head and ergonomic ...
Description:
Bolt cutter with interchangeable forged head and ergonomic handgrips for cutting round materials.Head and jaws are manufactured in high-strength chrome-vanadium steel.The 450 mm-long model features an offset nut for easy adjustment and sharpening.