Erem by Weller 120 mm Cutter

  • RS Stock No. 442-5829
  • Mfr. Part No. EROP331
  • Manufacturer Weller Erem
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

EROP side cutters

"EROP" - series from Erem

Attractive and inexpensive series
Covers various requirements and applications in industry, service, laboratory and trade
All pliers have a box joint, bronzed heads, stable opening springs and convenient interchangeable grip sleeves
Tools are ESD-proof

EROP419

Heavy duty design with a fine facet
For general purpose use
Suitable for copper wire → Ø 2mm and unhardened steel wire → Ø 1 mm
length: 130 mm

EROP155

Most common form for working on PCBs, housing and in telecommunications engineering
Suitable for copper wire → Ø 1 mm and diode wire → Ø 0.6 mm
Length: 110 mm

EROP357

Pointed form, fine blades
For stripping thin wires and cutting out small components in tightly packed assemblies
Suitable for copper wire → Ø 0.9 mm
Length: 110 mm

EROP330

Angle cutting pliers, narrow form, cutting angle 40 °
Ideal as a pointed cutter for precision work
Box joint for safe blade control
Suitable for copper wire → Ø 1 mm and diode wire → Ø 0.6 mm
length: 130 mm

EROP331

Angle cutting pliers, heavy duty design
For clean, smooth cuts, including copper wire
Double leaf spring
Suitable for copper wire from Ø 0.3 → 1.5 mm
Length: 120 mm

Erem EROP331 Oblique Cutters

The EROP331 cutters from Erem by Weller are oblique cutters featuring a full flush finish. The ergonomic handles allow for reduced fatigue in hands when working over long periods whilst offering the user ESD protection. Made from tough and durable forged steel with cutting edges hardened to Rockwell 63-65 HRc. A maximum cutting capacity of 1.5 mm for copper wire and jaw width of 12 mm.

Features and Benefits

• Protection of electronic components from risks of electrostatic discharge (ESD)

• Full flush cutting of heavy copper wire

• Ergonomic shaped handles for high comfort

• Manufactured from forged steel

• Hardened cutting edge to 63-65HRc

Typical Applications

Cutters are hand tools used to cut through wires and are available in a range of shapes and sizes to suit a variety of tasks and applications. The most common type of cutter head is oval, tapered and angled. The type of cut produced depends on the bevel of the cutter. Semi-flush cutters are more durable and produce a quick cut rough rougher edges, whereas an ultra-flush bevel will produce a much cleaner cut but is susceptible to damage. Cutters are commonly used in applications such as:

• DIY • Industrial
• Construction
• Electronic Installation

Care and maintenance

Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion.

FAQ's

What material is this cutter suitable with?

This cutter is suitable to cut copper wires 0.1 to 1.5 mm precisely.

What is the bevel of this cutter?

The EROP331 provides a full flush cut.

Specifications
Attribute Value
Type Electronics Diagonal Cutters
Overall Length 120 mm
ESD Safe Yes
Maximum Cutting Capacity 1.5mm
8 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 91.31
(exc. GST)
$ 105.01
(inc. GST)
units
Per unit
1 +
$91.31
Related Products
High-quality diagonal cutting pliers with angled head for ...
Description:
High-quality diagonal cutting pliers with angled head for flush cuts. Manufactured from heat treated high chrome steel, with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a more comfortable controlled grip. Ideal for electronics work, cutting tempered ...
VDE certified and individually tested to 10,000v for ...
Description:
VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for unsurpassed cutting performance. Wire stripping ...
Precision cutting edge. Chrome vanadium steel jaw. Plastic ...
Description:
Precision cutting edge. Chrome vanadium steel jaw. Plastic dipped insulated grip. Excellent mechanical and electrical properties over temperature range -25°C to +70°CTested to 10 000VCutting edge hardness 62 HRCDesigned to protect user against accidental contact, flashover when working on or ...
Cuts and bends component lead in one action ...
Description:
Cuts and bends component lead in one action allowing retention of the component in a PCB prior to soldering. The lead can be straightened and component removed if required.These special cutting and forming pliers having substantial pressed steel frames, chemically ...