Linear Technology LT8300IS5#TRMPBF Isolated DC-DC Converter, Adjustable 23-Pin, TSOT-23

  • RS Stock No. 151-3079
  • Mfr. Part No. LT8300IS5#TRMPBF
  • Manufacturer Analog Devices
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The LT8300 is a micropower high voltage isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single external resistor. Internal compensation and soft-start further reduce external component count. Boundary mode operation provides a small magnetic solution with excellent load regulation. Low ripple Burst Mode operation maintains high efficiency at light load while minimizing the output voltage ripple.

260mA, 150V Internal DMOS Power Switch Low Quiescent Current Boundary Mode Operation at Heavy Load Low-Ripple Burst Mode Operation at Light Load Minimum Load 0.5% (Typ) of Full Output VOUT Set with a Single External Resistor

Specifications
Attribute Value
Maximum Output Voltage 5 V
Minimum Input Voltage 6 V
Maximum Input Voltage 100 V
Maximum Output Current 260mA
Converter Type Isolated Flyback
Number of Outputs 1
Output Type Adjustable
Mounting Type Surface Mount
Package Type TSOT-23
Pin Count 23
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Width 1.5mm
Height 0.9mm
Dimensions 2.9 x 1.5 x 0.9mm
Maximum Switching Frequency 780 kHz
Switching Regulator Yes
Efficiency 85%
Length 2.9mm
Line Regulation 0.01 %/V
On back order for despatch 15/04/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (On a Reel of 500)
$ 8.213
(exc. GST)
$ 9.445
(inc. GST)
units
Per unit
Per Reel*
500 - 500
$8.213
$4,106.50
1000 +
$8.008
$4,004.00
*price indicative
Related Products
The easy-to-use inductorless Charge Pump ICs from Texas ...
Description:
The easy-to-use inductorless Charge Pump ICs from Texas Instruments offer a small-sized, simpler solution with high performance. The charge pump or switched-capacitor converter is an alternative solution to inductive DC-DC converters and delivers higher efficiency than Low Dropout (LDO) regulators. ...
Linear Technology product series of synchronous and non-synchronous ...
Description:
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, ...
Texas Instruments DC-to-DC Converter Non-Isolated Step-Down Power Modules ...
Description:
Texas Instruments DC-to-DC Converter Non-Isolated Step-Down Power Modules with adjustable output voltage. Integrated shielded inductor. Precision enable, soft-start, and tracking for sequencing. Best-in-class thermal performance. Pin-to-pin compatible modules for different load currents. Easy-to-use packaging. ...
The STEVAL-ISA200V1 evaluation board is based on the ...
Description:
The STEVAL-ISA200V1 evaluation board is based on the A6984 high-efficiency monolithic synchronous step-down DC-DC converter chip designed for Automotive applications. • Input voltage: +4.5 to +36Vdc • Output voltage: Adjustable from +0.9V (Board default +3.3V) • Maximum output current: 400mA ...