- RS Stock No.:
- 363-9601
- Brand:
- RS PRO
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 363-9601
- Brand:
- RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
RS PRO, DC Motor Controller, Potentiometer Control, 19 → 34 V dc, 15 A, Skeleton/Boxed
These DC motor controllers from our trusted RS PRO range have microprocessors that monitor the load on a motor and adjust the torque as needed with minimum noise. They're designed for use with permanent-magnet and shunt-wound motors.
For safety, a prominent green LED light on the circuit board notifies you when the current is tripped, the supply voltage is low or the motor is overheated. If a critical temperature rise is detected, the controller's innovative thermal shutdown means it'll turn itself off gradually. An input relay turns the motor controller off in case of severe faults and if there's no activity for more than 15 seconds it will go into sleep mode.
You can select from a range of presets including high or low speed, overcurrent, acceleration or deceleration. The potentiometer input lets you control the speed of the motor more accurately. The durable construction and safety features mean it's suitable for cars, computer drives and fans.
For safety, a prominent green LED light on the circuit board notifies you when the current is tripped, the supply voltage is low or the motor is overheated. If a critical temperature rise is detected, the controller's innovative thermal shutdown means it'll turn itself off gradually. An input relay turns the motor controller off in case of severe faults and if there's no activity for more than 15 seconds it will go into sleep mode.
You can select from a range of presets including high or low speed, overcurrent, acceleration or deceleration. The potentiometer input lets you control the speed of the motor more accurately. The durable construction and safety features mean it's suitable for cars, computer drives and fans.
Features and Benefits
DC Motor Controller
Potentiometer input control
Supply voltage of 19 to 34 V D/C
Continuous current rating of 15 to 30 A or peak rating of 27 to 56 A
Permanent magnet and shunt-wound motor copatibility
Voltage rating of 24 V
Minimum operating temperature of -50°C
Maximum operating temperature of +65°C
Skeleton/boxed mounting
Length of 148 mm
Width of 132 mm
Depth of 24 mm
Potentiometer input control
Supply voltage of 19 to 34 V D/C
Continuous current rating of 15 to 30 A or peak rating of 27 to 56 A
Permanent magnet and shunt-wound motor copatibility
Voltage rating of 24 V
Minimum operating temperature of -50°C
Maximum operating temperature of +65°C
Skeleton/boxed mounting
Length of 148 mm
Width of 132 mm
Depth of 24 mm
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specifications
Attribute | Value |
---|---|
Supply Voltage | 19 → 34 V dc |
Current Rating | 15 A |
Voltage Rating | 24 V |