Mean Well, NDR DIN Rail Power Supply, 12V dc Output Voltage, 6.3A Output Current

  • RS Stock No. 122-2210
  • Mfr. Part No. NDR-75-12
  • Manufacturer Mean Well
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Mean Well NDR Series Single Output Industrial DIN Rail Power Supply

Economical and slim, the NDR range of power supplies (PSU) can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation.
The entire series can operate between -20°C and 60°C under air convection.

Features and Benefits

• Universal AC input/Full range
• Short circuit/Overload/Over voltage/Over temperature protections
• Can be installed on DIN Rail TS-35/7.5 or 15
• Cooling by free air convection
• UL 508 (industrial control equipment) approved
• EN61000-6-2 (EN50082-2) industrial immunity level
• 100% full load burn-in test
• 3 years warranty
• Built-in active PFC function (NDR-240 & NDR-480)

Product Application Information

The NDR series PSU by Mean Well is ideal for use in industrial control systems, semiconductor fabrication equipment, factory automation and electro-mechanical apparatus.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Mean Well NDR-75-12 Power Supply, 12 V, 6.3 A, 75.6 W

Efficiency 85.5 %

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 90 → 264V ac
Output Voltage 12 V dc
Output Current 6.3 A
Power Rating 75W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 32mm
Depth 102mm
Mounting Type DIN Rail Mount
Load Regulation ±1%
Special Features Overvoltage and Short Circuit Protection
Maximum Temperature +70°C
Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
Series NDR
Minimum Temperature -20°C
Ripple And Noise 80mV Pk-Pk
MTBF 486.2kh
Output Voltage Adjustment Range 12 → 14V
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
Was $109.59
$ 46.09
(exc. GST)
$ 53.00
(inc. GST)
units
Per unit
1 +
$46.09
Related Products
A range of single phase DIN Rail power ...
Description:
A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W. • AC input range selectable by switch• Protections: Short circuit/Overload/Over voltage/Over temperature• Cooling by free ...
The DRA series power supply units by Mean ...
Description:
The DRA series power supply units by Mean Well provide a full range constant current output and have also been equipped with a built-in 3 in 1 dimming function. Changing the LED lighting intensity is easy, there is a choice ...
From RS Pro a range of high-performance power ...
Description:
From RS Pro a range of high-performance power supplies in a compact 35mm DIN rail mounting package for convenience and space saving. These DIN rail mount power supplies are available with a range of power ratings from 15 W to ...
The DRE series from Chinfa is a compact ...
Description:
The DRE series from Chinfa is a compact AC-DC DIN Rail mountable power supply with built-in active PFC.With a high efficiency of between 91% and 93%, the DRE series is cost effective and delivers reliability. • Parallel function (switch selectable) ...