PULS, DIMENSION Q DIN Rail Panel Mount Power Supply, 48V dc Output Voltage, 10A Output Current

  • RS Stock No. 670-0674
  • Mfr. Part No. QS20.481
  • Manufacturer PULS
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

Dimension Q Series

The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation.

Single-phase or three-phase units from 80 to 960W
Active power factor correction
Minimal inrush current
50% power reserves for typ. 4s controlled by an intelligent power manager
Quick-connect spring-clamp terminals
DC-ok LED and overload LED
DC-ok relay contact
DC Input from 88-375V for single phase
Active filtering of input transients
Short term operation down to 60Vac and up to 300Vac
Parallel and serial use

Standards

IEC, UL, EN, SELV

Specifications
Attribute Value
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 100 → 240V ac
Output Voltage 48 V dc
Output Current 10 A
Power Rating 480W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 124mm
Width 82mm
Depth 127mm
Minimum Temperature -25°C
Mounting Type DIN Rail Mount
Maximum Temperature +70°C
Ripple And Noise 100mV Pk-Pk
Series DIMENSION Q
MTBF 840000h
Load Regulation 100mV
1 : Next working day
10 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 896.55
(exc. GST)
$ 1,031.03
(inc. GST)
units
Per unit
1 +
$896.55
Related Products
A range of ultra slim single output DIN ...
Description:
A range of ultra slim single output DIN Rail power supplies with short circuit, overload and over voltage protection. These PSUs can be installed on DIN Rail TS-35/7.5 or 15 and offer cooling by free air convection. Universal AC input/Full ...
Primary clocked switching power supply units. Wide input ...
Description:
Primary clocked switching power supply units. Wide input range. High efficiency. Adjustable output voltages (devices > 10 W)Low power loss and low heat development. Free convection cooling (no forced cooling by fan)Idle, overload and continuous short circuit proof. Integrated input ...
The CP-Series, part of the DIMENSION power supply ...
Description:
The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. The CP10.241-R2 units include a decoupling MOSFET for building 1+1 or n+1 redundant power supply systems without the need of external redundancy ...
Slim profile, for DIN-rail mounting. Alternative side-mounting for ...
Description:
Slim profile, for DIN-rail mounting. Alternative side-mounting for flat panels. High power factor by active power correction. Very high efficiency up to 94.5%Back power immunity150% peak current for 4 sec.Operating temperature range: –25°C to +70°C max.Adjustable output voltage. Short circuit ...