Siemens, SITOP PSU100L DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 10A Output Current

  • RS Stock No. 756-3943
  • Mfr. Part No. 6EP1334-1LB00
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

SITOP Lite, Single Phase Power Supplies

SITOP lite are a range of power supplies from Siemens designed to meet the basic needs for use in industrial environments. The compact design means that these primary switched mode regulators require little space on the DIN Rail. The high efficiency of this range results in low power consumption and heat loss in the cabinet. The single phase SITOP lite power supplies are designed for basic requirements in industrial environments and offer all the key functions at an attractive price.

Features and Benefits

• Single phase wide-range input with manual switchover • Slim design - no lateral installation clearances required
• High degree of efficiency
• Green LED for "24 V OK"
• Adjustable output voltage for compensating voltage drops
• Parallel connection possible
• Ambient temperature range of 0°C to 60°C (above 45°C with derating)
• Short circuit and overload protection
• Certification to CE, cULus and CD

Product Application Information

To further increase 24 V availability, the SITOP lite power supplies can be combined with DC UPS, redundancy and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, CB

Siemens 6EP1334-1LB00 Power Supply, 24 V, 10 A, 240 W

Specifications
Attribute Value
Input Voltage 120 → 230V ac
Output Voltage 24 V dc
Output Current 10 A
Power Rating 240W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 70mm
Maximum Temperature +60°C
Depth 125mm
Minimum Temperature 0°C
Output Voltage Adjustment Range 22.8 → 26.4V
Mounting Type DIN Rail
Load Regulation 0.5%
Ripple And Noise 150mV Pk-Pk
Series SITOP PSU100L
30 Within 5 working day(s) (Global stock)
55 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 244.58
(exc. GST)
$ 281.27
(inc. GST)
units
Per unit
1 - 2
$244.58
3 - 4
$214.02
5 +
$192.61
Related Products
The new generation of Schneider Electric DIN Rail ...
Description:
The new generation of Schneider Electric DIN Rail Power supplies, specifically the ABL8 series, brings a new meaning to your automated systems. The ingenuity of the ABL8 means you have greater control of your systems via the use of several ...
A range of single phase DIN Rail power ...
Description:
A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W. • Universal AC input/full range• Protections: Short circuit/Overload/Over voltage/Over temperature• Cooling by free air convection• ...
Slim profile, for DIN-rail mountingAlternative side-mounting for flat ...
Description:
Slim profile, for DIN-rail mountingAlternative side-mounting for flat panelsHigh power factor by active power correctionVery high efficiency up to 94.5%Back power immunity150% peak current for 4 sec.Operating temperature range: –25°C to +70°C max.Adjustable output voltageShort circuit and overload protectionDC–OK ...
The SITOP Power DC-DC converter from Siemens is ...
Description:
The SITOP Power DC-DC converter from Siemens is used for connecting to networks over permanent wiring. Short circuit-proof and open circuit-proof, this DC-DC converter is the optimum power supply for automation solutions in the lower performance range. Its wide-range input ...