Megger MFT1835 Electrical Tester

  • RS Stock No. 901-1333
  • Mfr. Part No. MFT1835-AU
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MFT1835 Multifunction Tester (AU Version)

The MFT1835 Multifunction Tester (AU Version) is designed for testing low voltage electrical installations to IEC 60364. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The MFT1835 brings Type B RCD testing, 3-pole earth electrode testing with attached rod technique and stakeless testing to a downloading and rechargeable instrument.

Simple colour-coded test selection and large clear backlit display for ease of use
Two and three wire non-trip loop testing for RCD protected circuits
Internal memory and Bluetooth® communications
Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
3-terminal earth test and stakeless testing for spike resistance measurement
EN61010 CATIV safety ratings and tough IP54 case

Supplied with

MFT1835 Multifunction Tester, Switched probe SP5, Neck strap - Megger embroidered, 3 Wire lead set with prods and clips, AU/NZ plug test lead and AC battery charger.

Megger Multifunction Tester

The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with Europe mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing with attached rod technique and stakeless testing to a downloading and rechargeable instrument. To reduce the cost of ownership, it has rechargeable batteries and has charge time is less than 4 hours

Features and Benefits

3-terminal earth test and stakeless testing for spike resistance measurement Full input protection and safety warnings when a hazardous voltage is present Internal memory and Bluetooth communication Simple colour-coded test selection and large clear backlit display for ease of use Two and three wire non-trip loop testing for RCD protected circuits

Applications

Commercial sites Industrial sites Residential sites

Certifications

EN61010 CATIV IEC 61010 CAT IV 300 V IEC60364 IP54 rated

Specifications
Attribute Value
Loop Impedance Test Type 2 Wire, 3 Wire
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 1000V
Maximum Voltage Measurement 600V
Test Type Continuity, RCD
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type Europe Mains
Continuity Test Current 205 mA @ 0 2 Ω
RCD Test Type AC, B
Test Standards IEC 60364
Safety Category Level CAT III, CAT V
Plug Type Australia, New Zealand
Maximum Continuity Resistance 99.9kΩ
Safety Category Voltage 300 V, 600 V
Battery Type AC, Rechargeable
Safety Category CAT III 600 V, CAT V 300 V
Display Type Backlight
Maximum Operating Temperature +55°C
Weight 1 (with Battery)kg
Model Number p MFT1835
Height 85mm
Minimum Operating Temperature -10°C
IP Rating IP54
Minimum Continuity Resistance 0.01Ω
Dimensions 235 x 150 x 85mm
Length 235mm
Power Source Battery
Width 150mm
Temporarily out of stock - back order for despatch 29/04/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
Was $2,785.82
$ 2,661.78
(exc. GST)
$ 3,061.05
(inc. GST)
units
Per unit
1 +
$2,661.78