Linear Technology LTC4265IDE#PBF, Ethernet Controller

  • RS Stock No. 155-9321
  • Mfr. Part No. LTC4265IDE#PBF
  • Manufacturer Analog Devices
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Power over Ethernet (PoE) Controllers, Linear Technology

Linear Technology’s Power over Ethernet (PoE) Controller devices facilitates the injection or extraction of power into Ethernet data lines allowing the transmission of both data and power through a single cable. Some networked devices with modest power requirements such as wireless access points, IP telephones and IP cameras may make use of PoE.

Power management ICs by Linear Technology are widely used in applications such as the industrial, automotive, telecommunications, medical, computing and military Industries. The Powered Device (PD) controllers support more than one power levels of Power over Ethernet: IEEE PoE, IEEE PoE+, and LTPoE++. PSE controllers detect and classify Powered Devices (PDs) the right amount of power is sourced to PDs over the Ethernet cables.

LTPoE++, PoE+ and PoE Controllers can all be mixed and matched.
PSE and PD controllers connect and communicate with one another
Power levels of Power over Ethernet:
IEEE PoE (13 W)
IEEE PoE+ (25.5 W)
LTPoE++ (up to 90 W) standard

Switching Voltage Regulators, Linear Technology

Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.

Specifications
Attribute Value
Physical Network Type PoE-Base
Network Interface PD Interface
Standard Supported IEEE 802.3
Mounting Type Surface Mount
Package Type DFN
Pin Count 12
Typical Operating Supply Voltage 60 (Max.) V
Dimensions 4 x 3 x 0.7mm
Maximum Operating Temperature +85 °C
Length 4mm
Width 3mm
Minimum Operating Temperature -40 °C
Height 0.7mm
On back order for despatch 30/10/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Tube of 91)
$ 5.683
(exc. GST)
$ 6.535
(inc. GST)
units
Per unit
Per Tube*
91 +
$5.683
$517.153
*price indicative
Related Products
Festo CMMO-ST motor controller is a closed-loop and ...
Description:
Festo CMMO-ST motor controller is a closed-loop and open-loop position motor controller. Separate load and logic supply. Supports the safety function “safe torque off” (STO)Easy actuation via: – I/O interface – IO-Link or I-Port – Modbus TCPMonitoring of freely defined ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
The LAN9252 device from Microchip is a 2/3 ...
Description:
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over ...