RE522-HP, Single Sided DIN 41617 Eurocard PCB FR2 With 37 x 57 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Stripboard RE52x

European size (160 ´ 100 mm)
Printed circuit boards made from FR2 laminated paper (HP), coated with solder mask
FR4 epoxy circuit boards (LF), lead-free, tin-plated
Material thickness 1.5 mm
35 μm copper laminate
Hole pattern 2.54 ´ 2.54 mm
Continuous conductor tracks with hole Ø 1 mm
Grid for various multiple contact strips depending on the design

DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Specifications
Attribute Value
Base Material Synthetic Resin Bonded Paper
Number of Sides 1
Dimensions 160 x 100 x 1.5mm
Copper Thickness 35µm
Hole Diameter 1mm
Hole Layout 37 x 57
Hole Pitch 2.54 x 2.54mm
Connection DIN 41617
FR Material Grade FR2
Length 160mm
Thickness 1.5mm
Width 100mm
8 Within 7 working day(s) (Global stock)
43 Within 7 working day(s) (Global stock)
Price (ex. GST) Each
$ 9.75
(exc. GST)
$ 11.21
(inc. GST)
units
Per unit
1 - 9
$9.75
10 - 19
$9.61
20 - 49
$9.52
50 +
$9.23
Related Products
These SRBP paper prototyping boards from Roth Elektronik ...
Description:
These SRBP paper prototyping boards from Roth Elektronik are available in different models with the following features:. One-sided. Organic soldering protection (OSP)With holes – spacing: 2.54 x 2.54 mm. Hole diameter: 1.00 mm35 μm CUSize: 100 x 160 mm.
Finish is gold plating (nickel substrate)The surface mounted ...
Description:
Finish is gold plating (nickel substrate)The surface mounted IC can be inserted into the universal board just by cutting and attaching. The desired size is cut-out with scissors or cutters1.27mm pitch SOP IC conversion.
Finish is gold plating (nickel substrate)Board enables insertion ...
Description:
Finish is gold plating (nickel substrate)Board enables insertion of surface mount chip parts onto universal board. Each board will accommodate up to eight 3, 5 & 6 pin chip packages. Boards may be cut to desired size with scissors or ...
Extension board that can be connected to the ...
Description:
Extension board that can be connected to the flexible board connecter FPC/FFCThe desired pin number and shape can be cut out with scissors or cutters. Finish gold plating (nickel substrate).