Vent-Axia Solo Plus T Solo Plus Rectangular Flush Mounted, Surface Mounted Extractor Fan

  • RS Stock No. 884-1008
  • Mfr. Part No. Solo Plus T
  • Manufacturer Vent-Axia
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Vent-Axia Solo® Plus Centrifugal Bathroom/Toilet Fan

The Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Solo Plus can be flush or surface mounted, with a 100mm circular spigot for rear entry or connecting to a vertical ducting system. The spigot can also be adjusted for side ways exhaust enabling recessed ceiling installations within limited ceiling voids. The powerful centrifugal impeller allows for installations with longer duct runs using 100mm ducting, whilst still achieving 15 l/s as required by Document F of the current Building Regulations.

Continuous running products, such as the Solo Plus installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore, only needs to move the amount of air as laid down in table 1.1b of Document F.

The Solo Plus has a choice of two boost/override motor speeds set at installation, medium (17l/s) or high (22l/s), with an optional constant trickle speed (9l/s), also selectable at installation except in the P model. Depending on the model, the fan will switch from trickle (if selected) to boost (medium or high) via the pullcord/ light switch/humidity sensor/PIR.

Choice:
884-1004: Solo Plus P with pullcord
884-1008: Solo Plus T with timer
884-1017: Solo Plus HT with humidity and timer

Filterless as standard - innovative impeller design means no need for a filter
Meets current Building Regulations Approved Documents F & L requirements for domestic bathrooms and toilets
IPX4 rated
Flush or surface mountable
Adjustable rear or side exit spigot
Extremely low sound levels
Suitable for wall, ceiling and panel mounting

Wall / Ceiling Extractor Fans

Specifications
Attribute Value
Function Extraction
Noise Level 11.5 (Trickle) dBA, 24 (Min Boost) dBA, 34.5 (Max Boost) dBA
Mounting Flush Mounted, Surface Mounted
Face Dimensions 263 x 224mm
Depth 161mm
Face Height 263mm
Face Width 224mm
Special Features Adjustable Humidity Sensor, Adjustable Timer Overrun, Constant Trickle Option, Delay On Timer Option
Series Solo Plus
Termination Type Screw
Configuration Rectangular
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 362.48
(exc. GST)
$ 416.85
(inc. GST)
units
Per unit
1 +
$362.48
Related Products
Powerflow models provide a compact yet versatile range ...
Description:
Powerflow models provide a compact yet versatile range designed with the installer in mind, combining the acoustic benefits of a tough plastic casing with the pressure characteristics of a centrifugal fan.Powerflow has 50-80mm long inlet and discharge spigots allowing easy ...
Vent Axia ACM in-line mixed flow duct fans ...
Description:
Vent Axia ACM in-line mixed flow duct fans specifically designed for rigid and flexible ducting offering 2 times the pressure development of conventional axial fans. Designed and manufactured in the UKSupplied complete for installation. Can operate in both horizontal and ...
The Vent-Axia extractor square fan has an airflow ...
Description:
The Vent-Axia extractor square fan has an airflow of 870m³/h and supply voltage of 230VAC. It is a high-performance, ventilating unit designed to fit through most wall thickness using telescope liners supplied. It features a unique speed control pack that ...
The Vent-Axia extractor round fan has an airflow ...
Description:
The Vent-Axia extractor round fan has an airflow of710m³/h and supply voltage of 230VAC. It is suitable for most forms of single glazing or can be wall-mounted in a Vent-Axia fixing plate. Vent-Axia's patented spigot and ring method of fixing ...