Petzl ASAP Rope Lock Aluminium, Stainless Steel

  • RS Stock No. 136-3752
  • Mfr. Part No. B71AAA
  • Manufacturer Petzl
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Petzl ASAP Mobile Fall Arrest Device

Petzl ASAP mobile fall arrest device for rope, has a unique locking system and excellent fall protection working at height. In normal mode the ASAP moves freely along the rope, no manual intervention needed. If there is a shock or acceleration the ASAP locks on the rope and stops you plus it can be combined with the ASAP’SORBER energy absorbing lanyard to work at distances from the rope


ASAP Mobile fall arrest device Unique locking system
Protects workers at height
Normal use – move freely along rope – no manual intervention
Assists you in all movements
Works on vertical and angled rope
Shock or sudden acceleration – locks to the rope – stops falling
Can use with the – ASAP’SORBER energy absorbing lanyard
Easy to use and install
Comes with OK TRIACT-LOCK automatic locking carabiner


Made from Aluminium and Stainless Steel Weight – 370 g (295 for ASAP and 75 g fro OK TRIACT-LOCK)


EC EN 353-2, CE EN 12841 type A, EAC

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Attribute Value
Material Aluminium, Stainless Steel
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 359.75
(exc. GST)
$ 413.71
(inc. GST)
Per unit
1 +
Related Products
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at ...
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsDimensions: 85x85x35mm (Lock)Dimensions: 65x65x40mm (Armature plate)Over-ride switchBrushed stainless steel.
With an impressive holding force of up to ...
With an impressive holding force of up to 1200lbs, our high quality RS PRO range presents this stainless steel strong and durable magnetic lock. Able to remotely monitor a doors lock or un-lock status with quick operation. Application includes security ...
Suitable for off-shore, high corrosion applications, and equipment ...
Suitable for off-shore, high corrosion applications, and equipment subject to high temperature and high pressure wash down Made from 316 grade stainless steel with double seals Complies with EN60529 and EN 40050 Independently tested to comply with IP69K requirements Screwdriver ...
Codelocks with lever handles have been designed to ...
Codelocks with lever handles have been designed to control accesses to certain areas or safeguarding confidential and dangerous materials. The door locks are perfect to be used for any heavy duty range with full size lever handles, allowing use as ...