DBI-Sala 2m Fall Arrest Shock Absorbing Lanyard Twist Lock Karabiner Twin

  • RS Stock No. 123-6171
  • Mfr. Part No. 1245534
  • Manufacturer DBI-Sala
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SK
Product Details

EZ Stop Expander Shock Absorbing Lanyard

EZ STOP Expander shock absorbing lanyard, twin leg, supplied in a smaller and lighter shock pack rated up to maximum of 130 kg. The expander lanyard uses HI-10 energy absorbing technology and is five times stronger than steel. Identification labels are easy to access and are fully protected using I-Safe. Each lanyard can be tracked plus is marked with a unique serial identification number. An aluminium twist lock carabineer body connector is included along with two scaffold hook aluminium anchor connectors. The elasticated webbing reduces the length by 50 cm when not under tension.

Features and Benefits

Expander Twin leg
Leg material – 35 mm polyester webbing
Elasticated webbing reduces length by up to 50 cm
Reduced trip snarling
Length 2 m
Maximum user weight 130 kg
Small and light shock pack
HI-10 energy absorbing technology
5 times stronger than steel
Identification labels

Body Connector

Lightweight Aluminium automatic twist lock carabineer
20 mm opening
Easy and secure body connection
28 kN breaking strength

Anchor Connectors

2 Scaffold hooks Aluminium
60 mm opening
AJ527/0
22 kN breaking strength

FAQ's

When should fall arrest lanyards be used?

Protection from fall hazards whenever the working height is more than 6 feet or more. When working on a scaffold, the height requirement for fall protection is 10 feet.

How often should fall arrest lanyards be checked?

This equipment should be inspected under the requirements of Regulation 12 of the Working at Heights Regulations 2005, which is the recommended inspection of 6 months.

Standards

EN355

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specifications
Attribute Value
Harness Connection Karabiner
Anchorage Connection Scafold Hook
Leg Type Twin
Adjustable No
Extended Length 2m
Weight Capacity 130kg
Lanyard Use Fall Arrest
Retractable No
Karabiner Type Twist Lock
10 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 302.87
(exc. GST)
$ 348.30
(inc. GST)
units
Per unit
1 +
$302.87
Related Products
Scaffolders Kit:Kit comprising harness & shock absorbing lanyardSingle ...
Description:
Scaffolders Kit:Kit comprising harness & shock absorbing lanyardSingle point harness AB17510CE:Provides body support with 1 anchorage pointShock Absorbing Lanyard AE5101:Safely arrests your fall reduces impact forces to below 6kN50mm opening Scaffold hook connection:Allows you to connect easily to any suitable ...
Petzl ASAP mobile fall arrest device for rope, ...
Description:
Petzl ASAP mobile fall arrest device for rope, has a unique locking system and excellent fall protection working at height. In normal mode the ASAP moves freely along the rope, no manual intervention needed. If there is a shock or ...
Petzl ASAP® LOCK mobile fall arrestor complete with ...
Description:
Petzl ASAP® LOCK mobile fall arrestor complete with locking function and designed to manage manipulations during rope ascents. An integrated locking function allows you to immobilise the lock reducing the length of a fall. You can move freely along the ...
Sanchoc single webbing lanyards including shock absorbers are ...
Description:
Sanchoc single webbing lanyards including shock absorbers are excellent for people who work at heights as they are flexible, shock and abrasion resistant. Terminations in the lanyard are stitched with a high strength polyamide thread plus all identification labels are ...