Petzl 0.95m Work Positioning Adjustable Lanyard Twist Lock Karabiner Single

  • RS Stock No. 136-3781
  • Mfr. Part No. L44IR
  • Manufacturer Petzl
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Petzl PROGRESS ADJUST-I Single Lanyard

Petzl PROGRESS ADJUST- is a single adjustable progression lanyard. When the lanyard is combined with another, it provides a continuous connection for all types of progression including movement along a lifeline and various progressions. Length is easy and quick to adjust due to the ADJUST rope adjuster and the connector is held in position for easy clipping.

FEATURES and BENEFITS:

PROGRESS ADJUST-I lanyard Single adjustable progression lanyard
Continuous connection during various progressions when used with a second lanyard
Rope ascent, the PROGRESS ADJUST can attach an ASCENSION handled rope adjuster
Allows lanyard adjustment when passing intermediate anchors
Lanyards of the same length provide easy progression along a life line
Precise length adjustment due to ergonomic shape of the ADJUST rope adjuster
Easy clipping
Dynamic rope lanyard to limit impact to you when there is a short fall
Use with 1 VERTIGO TWIST-LOCK auto-locking carabiner

SPECIFICATIONS:

Made from – Aluminium, Dyneema, Elastomer, Nylon, Polyester Length – up to 95 cm

Note

Progression lanyards do not have energy absorbers. They should only be used if the fall factor is less than 1. (used below the ASCENSION handled rope clamp or anchor point)

Standards

CE EN 358, EAC

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specifications
Attribute Value
Harness Connection Karabiner
Anchorage Connection Karabiner
Leg Type Single
Adjustable Yes
Extended Length 0.95m
Weight Capacity 100kg
Lanyard Use Work Positioning
Retractable No
Karabiner Type Twist Lock
20 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 106.03
(exc. GST)
$ 121.93
(inc. GST)
units
Per unit
1 +
$106.03
Related Products
SERVICES - ready for use fall arrest kit: ...
Description:
SERVICES - ready for use fall arrest kit: Harness with extensible "Riplight System II®" patented waves with positioning belt. 2 fall arrester anchorage points (back - front). 4 adjustable buckles. Positioning belt with thermoformed back closed with wide Velcro. 120° ...
Sanchoc single webbing lanyards including shock absorbers are ...
Description:
Sanchoc single webbing lanyards including shock absorbers are excellent for people who work at heights as they are flexible, shock and abrasion resistant. Terminations in the lanyard are stitched with a high strength polyamide thread plus all identification labels are ...
Sanchoc twin leg webbing lanyards including shock absorbers ...
Description:
Sanchoc twin leg webbing lanyards including shock absorbers are excellent for people who work at heights as they are flexible, shock and abrasion resistant. Terminations in the lanyard are stitched with a high strength polyamide thread plus all identification labels ...
EZ STOP Rope shock absorbing lanyard, single leg, ...
Description:
EZ STOP Rope shock absorbing lanyard, single leg, supplied in a smaller and lighter shock pack rated up to maximum of 130 kg. The Rope lanyard uses HI-10 energy absorbing technology and is five times stronger than steel. Identification labels ...