690 piece Ferrite Design Kit Wurth Elektronik Includes Ferrite Beads

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

SMD Ferrite Design Kits - WE-CBF Series

From Wurth Elektronic, these WE-CBF series Ferrite Design Kits contain special SMD chip bead ferrites that can be put directly on to a printed circuit board. WE-CBF kits offer ferrites with excellent anti-EMI properties and low DC-resistance. Placed very close next to the interference source even with smallest size 0402, maximal impedance at 1000 Ω can be reached. Recommended for reflow soldering, the WE-CBF ferrites are perfect for data line filtering and for uncoupling of distribution voltage.

Features and Benefits:

• Reliable Ni-Sn electrodes
• High rated current up to 6 A
• Operating temperature: –55 °C to +125 °C

Applications for the WE-CBF SMD Ferrite Design Kits include:-

• High Speed: “High Speed” SMD ferrites WE-CBF have lower impedance in the lower frequency ranges thus they have only low attenuation for fast signals. e.g. USB 2.0, IEEE 1394, LVDS.
• Wide Band: "Wide Band" SMD ferrites WE-CBF already show high impedance in low frequency range. Therefore they are wide band through the whole spectrum. e.g. control signals, RS232, RS422, DC/DC converter.
• High Current: "High Current" SMD ferrites WE-CBF are designed for high current (over 1A). The rated current refers to 40K self-heating.

WE-CBF SMD Ferrite Design Kit - Small Size (7622092)

The Wurth Elektronik Design Kit 742790 contains a full range of 0402, 0603 and 0805 WE-CBF SMD Ferrites for the use in voltage supplies and interfaces.

WE-CBF SMD Ferrite Design Kit - Large Size (7622102)

The Wurth Elektronik Design Kit 742791 contains a full range of 1206, 1210, 1806 and 1812 WE-CBF SMD Ferrites for the use in voltage supplies and interfaces. In addition the Design Kit contains WE-PBF Power Ferrite Beats, WE-CMS Common Mode Ferrite Beads, WE-SUKW SMD 6 hole ferrite beads.

Specifications
Attribute Value
Kit Includes Ferrite Beads
Number of Pieces 690
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 196.76
(exc. GST)
$ 226.27
(inc. GST)
units
Per unit
1 +
$196.76
Related Products
These filters are designed to act as resistors ...
Description:
These filters are designed to act as resistors to electronic noise frequencies. Limit potential interference. Do not generate distortion. Designed for high-speed data transmission lines.
BLM series ferrite beads from Murata do not ...
Description:
BLM series ferrite beads from Murata do not require a ground connection and are ideal for use in circuits with unstable ground lines. At noise frequencies, these ferrite beads are designed to function nearly as resistors, leaving signal wave forms ...
SMD Ferrite Beads, also called Multi-layer Chip Beads ...
Description:
SMD Ferrite Beads, also called Multi-layer Chip Beads or Impeders. Can be used as an alternative to sleeve chokes, 6-hole beads or UHF interference suppression chokes. Thanks to the special multilayer design, very small d.c. loss resistances are achieved in ...
This is a multilayered chip bead product magnetically ...
Description:
This is a multilayered chip bead product magnetically shielded, allowing high density mounting. The internal conductor design reduces floating capacity between conductors, which in turn has contributed to a dramatic improvement in high frequency characteristics. This product is able to ...