Polypropylene V floatswitch w/gasket,N/O

  • RS Stock No. 845-960
  • Mfr. Part No. RSF54Y100JC
  • Manufacturer Cynergy3
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Vertical Float Switches

The RSF50 series of compact vertical float switches have a single switching point, mounting is either from the top or bottom of the tank therefore access to the inside of the tank is required. These float switches are ideal for vending machine, printing systems, and chemical dosing applications.

Features & Benefits

Manufactured in a variety of materials with a choice of gasket materials to suit most commonly used liquids
Mounting in top or bottom of tank
N/O versions can be configured as N/C by float inversion
All units WRAS approved for use in hot and cold water

Note

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Supplied with

epoxy sealed leadouts

Warning

  • The cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specifications
Attribute Value
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Polypropylene
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF50
53 : Next working day
1157 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 41.32
(exc. GST)
$ 47.52
(inc. GST)
units
Per unit
1 - 5
$41.32
6 - 11
$39.67
12 +
$39.24
Related Products
The MS series of cable end float switches ...
Description:
The MS series of cable end float switches are designed for controlling levels in large tanks, cisterns or reservoirs. These level switches can be directly installed on submersible pumps, making them perfect for any water projects. This casing is made ...
Side mounting switches consisting of a reed switch ...
Description:
Side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. Can be used for 'normally open' or 'normally closed' operation, depending on orientation. All units WBS approved, product for use in hot and ...
The MS series of cable end float switches ...
Description:
The MS series of cable end float switches are designed for controlling levels in large tanks, cisterns or reservoirs. These level switches can be directly installed on submersible pumps, making them perfect for any water projects. This casing is made ...
Ball type float switch. Intrinsically Safe NAMUR Output. ...
Description:
Ball type float switch. Intrinsically Safe NAMUR Output. Closes Floating Up (make switch)Polypropylene Float. Density: ≥0.6g/cm35 Metres PVC (2 x 0.75mm2) Cable. Can Only Be Used With a Galvanic Isolation Barrier.