GFS polypropylene float switch,100VA

  • RS Stock No. 228-1992
  • Mfr. Part No. RSF34W100RF
  • Manufacturer Cynergy3
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details
//media.rs-online.com/t_line/L228198-02.gif
//media.rs-online.com/t_line/LD228198-02.gif
//media.rs-online.com/t_line/LF228198-10.gif
//media.rs-online.com/t_line/LI228198-02.gif

Cynergy3 Float Switch

The Cynergy3 RFS30 series float switch is horizontal mount type and has NO/NC output configuration. This float switch has a polyethylene body. This is a higher power, side-entry, internally fitted switch. This switch is used for directly switching some small loads of less than 100VA. Fitting of this type requires access to the inside of the tank. These are side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. The switch action may be reversed by rotating the device through 180°.
Note:
Suitable for signal switching and use with transistorised input/ low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e. G. filament lamps) loads.

Inclusions:
1m long, PVC 16// 0.2 cable.

Features and Benefits

Minimum fluid SG is 0.85
Operating temperature ranges between -20°C and 100°C
Cable length is 1m
Maximum switching power is 100VA
Leadouts:100cm PVC 16/0.2

Certifications

WRAS approved
UL listed

Specifications
Attribute Value
Device Type Float
Mounting Type Horizontal
Switch Output NO/NC
Body Material Polypropylene
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Maximum Current 5 A
Gasket Material Nitrile
Series RSF30
99 : Next working day
121 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 53.29
(exc. GST)
$ 61.28
(inc. GST)
units
Per unit
1 - 5
$53.29
6 - 11
$52.02
12 +
$51.60
Related Products
The RS PRO float switch requires access to ...
Description:
The RS PRO float switch requires access to the inside area of the tank. The switch action may be reversed by rotating the device through 180°. Cable sets with M12 plugs are also available. • Body is Made of polypropylene• ...
The RS PRO float switch is designed for ...
Description:
The RS PRO float switch is designed for RSF mounting through the wall of a tank, via NPT thread without requiring access inside the tank. The switch can be fitted to achieve either make on rise (N/O) or make on ...
The Cynergy3 RFS10 series drop float switch is ...
Description:
The Cynergy3 RFS10 series drop float switch is designed to eliminate the problems associated with limescale build-up around the pivot point of the conventional float switch. It has an electrical rating of 240VAC and 0.6A. This particular series is primarily ...
Horizontal float switches with a low-cost compact design ...
Description:
Horizontal float switches with a low-cost compact design and WRAS approval. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed ...