S/steel horizontal mount floatswitch,50W

  • RS Stock No. 235-6204
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Stainless Steel, Vertical Float Switch – Horizontal Mount

Horizontal mount with right angled stem
SPST output
Internal vessel mounting
Float reversal, rise or fall operate
Top or bottom tank mounting
Silicone sealing washer
Maximum pressure: 10 bar Kg/cm2
Cable: XLPE, AWG22
Contact resistance: 200mΩ
Clearance hole diameter: 10mm

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specifications
Attribute Value
Device Type Float
Mounting Type Horizontal
Switch Output Direct Load
Body Material Stainless Steel
Cable Length 300mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +120°C
Maximum AC Voltage 300V
Maximum DC Voltage 300V
Maximum Current 500 mA
Maximum Pressure 10bar
10 : Next working day
82 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 203.27
(exc. GST)
$ 233.76
(inc. GST)
units
Per unit
1 - 5
$203.27
6 +
$195.15
Related Products
A robust, compact level switch suitable for use ...
Description:
A robust, compact level switch suitable for use in contaminated liquids. The LS-240-E is accepted by Germanischer Lloyd and the German Navy and is ideally suited to applications involving heavy mechanical loads.
The RS PRO 312-7164 is an internal fitting ...
Description:
The RS PRO 312-7164 is an internal fitting float switch. This compact switch measures just 64mm high and 28mm in diameter. The 312-7164 is made from 316 grade stainless steel which means it offers great resistance against corrosion. How is ...
Horizontal float switches with a low-cost compact design ...
Description:
Horizontal float switches with a low-cost compact design and WRAS approval. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed ...
IP65 die-cast aluminium enclosure with Nitrile O-ring seal. ...
Description:
IP65 die-cast aluminium enclosure with Nitrile O-ring seal. Stainless steel, TIG-welded stem. Volt-free reed switches and resistors are mounted in the stem to provide varying resistance as the float rises and falls (converted into 4 to 20mA stepped output)Minimum high ...