Switch, Horiz, Ext Mnt, UL,100VA

  • RS Stock No. 756-4286
  • Mfr. Part No. RSF78H100RN
  • Manufacturer Cynergy3
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Cynergy3 Horizontal Float Switches

Horizontal float switches with a low-cost compact design and WRAS approval. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

Features & Benefits

Low cost compact design Available in Nylon, Polypropylene and Poly Phenylene Sulfide (PPS)
Consists of reedswitch and pivoted actuator magnet
Can be used for N/O or N/C operation
Internal and external mounting options available
All units WRAS approved

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

Approvals

UL recognised

This float switch is designed for fitting through a tank wall from the outside where access to the internal fitting is not possible. The float switch is fitted in a 23 mm dia. hole in the tank from the outside and secured by a compression seal with a backnut.

PPS material
External mounting
Compression seal
100cm PVC Flying lead

Product Application Information

This PPS float switch is suitable for use in most organic and inorganic chemicals and most oils. Typical applications include vending machines, commercial dishwashers and auxiliary tanks on vehicles

Specifications
Attribute Value
Device Type Float
Mounting Type Horizontal External
Switch Output NO/NC
Body Material Polypropylene
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Maximum Current 1 A
Gasket Material Nitrile
Series RSF70
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
Was $41.91
$ 39.25
(exc. GST)
$ 45.14
(inc. GST)
units
Per unit
1 - 5
$39.25
6 - 24
$38.42
25 +
$38.12
Related Products
Professional range of LS-74780 series single point level ...
Description:
Professional range of LS-74780 series single point level switches from Gems Sensors. The LS-74780 series level switches are suited for service and ideal for use in chemical and plating applications. All models are highly reliable and excellent quality.
Level control (Emptying or Filling) for conductive liquids. ...
Description:
Level control (Emptying or Filling) for conductive liquids. Sensitivity fixed or adjustable (5…150kΩ)35mm rail mount. ApplicationsAutomatic car-washes. Bottling plant. Building automation. Confectionary machines.
The MS series of cable end float switches ...
Description:
The MS series of cable end float switches are designed for controlling levels in large tanks, cisterns or reservoirs. These level switches can be directly installed on submersible pumps, making them perfect for any water projects. This casing is made ...
Ball type float switch. Intrinsically Safe NAMUR Output. ...
Description:
Ball type float switch. Intrinsically Safe NAMUR Output. Closes Floating Up (make switch)Polypropylene Float. Density: ≥0.6g/cm35 Metres PVC (2 x 0.75mm2) Cable. Can Only Be Used With a Galvanic Isolation Barrier.