Entrelec Fused DIN Rail Terminal, D Series, 2.5 (stranded) mm², 4 (solid) mm², 630 V, 6.3A, 5 x 20 mm, 5 x 25 mm Fuse

  • RS Stock No. 533-6483
  • Mfr. Part No. 1SNA290094R2100
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Standard Terminal Blocks

These screwless spring cage clamp terminals are specifically designed for use with 'Top Hat' rail.,The top entry conductor connection is simplicity itself; a flat-bladed screwdriver will ease the spring clamp apart ready for conductor insertion.The range covers conductor sizes from 2.5mm² to 10mm² stranded wire (4mm² to 16mm² solid wire). Disconnect fuse and sensor/actuator terminals also available.,The grey (phase) terminals are available in standard (1 in / 1 out, 1 in / 2 out), and 2 in / 2 out form, together with a 2.5mm² double-deck terminal.,The standard (1 in / 1out) yellow terminals are designed for grounding purposes, but they DO NOT provide an electrical connection to the DIN rail.,They have a green colour-coded conductor entry point, for the intended insertion of a grounding or earth-potential cable.,* Direct earth (connection to rail) green/yellow terminals are available in 2.5/5mm², and 6/8mm²,End plates in respective sizes are also available, as are dedicated end-stops.


  • The yellow terminals must not be considered to be 'direct earth' terminals as they do not have an integral connection to the rail.
Attribute Value
Number of Levels Double
Wire Size 12 AWG
Cable CSA 2.5 (stranded) mm², 4 (solid) mm²
Colour Grey
Pitch 8mm
Fuse Size 5 x 20 mm, 5 x 25 mm
Current Rating 6.3A
Voltage Rating 630 V
Termination Method Spring Clamp
Rail Type Compatibility TS35
Series D
Maximum Operating Temperature +110°C
20 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 15.198
(exc. GST)
$ 17.478
(inc. GST)
Per unit
Per Pack*
5 +
*price indicative
Related Products
Fuse plug for G-fuses 5 x 20 mm. ...
Fuse plug for G-fuses 5 x 20 mm. Visual control of fuses in use via the LED display. Width 6.2 mm. Insulating material PAFire protection rating in accordance with UL 94 V0.
A range of standard feed through DIN Rail ...
A range of standard feed through DIN Rail terminals with an easy to operate screw connection mechanism that can connect solid and flexible wires, with or without wire-end ferrules. The pluggable insulated cross connection system allows for time saving and ...
WWK 2,5-3 D/U /V0 Initiator terminal block with ...
WWK 2,5-3 D/U /V0 Initiator terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 2.5 sq.mm, width 6 mm, colour gray. (See RS Stock No. 865-1340)WK 2,5-3 D SL /V0 Initiator terminal block ...
Lever and screw cap styles for fuse sizes ...
Lever and screw cap styles for fuse sizes 5x20mm, 5x25mm and 6x32mm Markers maybe fitted above both wire entriesLED type has 24V LED in parallel. Endplate width 1.5 mm.