4D Systems SK-43PT-AR, 4.3in Resistive Touch Screen Starter Kit for Arduino

  • RS Stock No. 790-5703
  • Mfr. Part No. SK-43PT-AR
  • Manufacturer 4D Systems
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino

The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

Features

4D-Labs PICASO processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
micro-SD card socket
13 x GPIO pins
I2C and UART serial communications
Powered from Arduino

Package Contents

4D Arduino adapter Shield
microSD card - 2GB or 4GB, model dependant
uUSB-PA5 programming adapter
Female to female 150mm 5-way jumper cable
5 way male to male adapter
Quick Start User Guide

Note

Arduino MCU module is not included.

For new designs the 4D Systems gen4 range of LCD displays should be considered, including:
• gen4-uLCD-24DT (RS part 1257941)
• gen4-uLCD-28DT (RS part 1257942)
• gen4-uLCD-32DT (RS part 1257943)
• gen4-uLCD-43DT (RS part 1257947)

4D Systems LCD Touchscreens

Specifications
Attribute Value
Diagonal Display Size 4.3in
Display Technology Resistive Touch Screen
Kit Classification Starter Kit
For Use With Arduino
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 284.21
(exc. GST)
$ 326.84
(inc. GST)
units
Per unit
1 +
$284.21
Related Products
The starter kit SK-gen4-28DT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-28DT-PI from 4 D Systems is intended for the Raspberry Pi (see 896-8660). The Kit offers an integrated 2.8” display module with accessories. The Gen4-28DT-PI uLCD module has a resistive touch display and it helps you explore ...
This colour 2.8” TFT display has 4 bright ...
Description:
This colour 2.8” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering ...
Description:
The PiTFT Plus are a range of TFT LCD resistive touchscreens designed specifically to fit neatly onto the top of a Raspberry Pi.They are available with 3 screen sizes: 2.8, 3.2 and 3.5 inch. • Low power consumption, suitable for ...
This IDS Personality Module is an accessory board ...
Description:
This IDS Personality Module is an accessory board for the IDS Display Demo System, adding the capability to demonstrate an IDS REX012864Kxx OLED display. Personality Modules provide a simple mounting for the display to be demonstrated, along with the required ...