AH337-WG-7 DiodesZetex,, Unipolar Hall Effect Sensor, 4.2 to 28 V, 3-Pin SC-59

  • RS Stock No. 122-0353
  • Mfr. Part No. AH337-WG-7
  • Manufacturer DiodesZetex
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Hall Effect Switches & Latches, Diodes Inc

Hall Effect Sensors, Diodes Inc

A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Unipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point 30 Gs
Maximum Magnetic Sensor Operating Point 150 Gs
Minimum Operating Supply Voltage 4.2 V
Maximum Operating Supply Voltage 28 V
Length 3.1mm
Width 1.7mm
Height 1.3mm
Dimensions 3.1 x 1.7 x 1.3mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SC-59
Typical Magnetic Sensor Hysteresis 60 Gs
3000 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (On a Reel of 3000)
$ 0.398
(exc. GST)
$ 0.458
(inc. GST)
units
Per unit
Per Reel*
3000 - 3000
$0.398
$1,194.00
6000 - 9000
$0.378
$1,134.00
12000 +
$0.366
$1,098.00
*price indicative
Related Products
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing. Laser trimmed thin and thick film resistors-40 to 125°C operating ...
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide ...
Description:
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...