Si7210-B-01-IVR Silicon Labs,, Linear Hall Effect Sensor, 5-Pin SOT-23

  • RS Stock No. 144-6558
  • Mfr. Part No. Si7210-B-01-IVR
  • Manufacturer Silicon Labs
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Si7210 I2C Hall Effect Magnetic Sensors

The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall element, low-noise amplifier, 13-bit ADC and comparator in a single compact package with I2C functionality.

• Digital I2C Interface with 4 selectable addresses
• Optional Digital Alert output
• Optional ratiometric analogue output
• Optional Tamper detect versions
• Wide 1.7 to 5.5 V operating voltage range
• Industry-leading sensitivity allows use with larger air gaps and smaller magnets
• Low power consumption to improve operating life in battery powered applications
• Compact 5-pin SOT23 package
• AEC-Q100 Qualified for automotive applications

The Si720x family of Hall effect magnetic sensors and latches from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13- bit analog-to-digital converter, and flexible comparator circuit. The Si720x family incorporates digital signal processing to provide precise compensation for temperature and offset drift. Compared with existing Hall effect sensors, the Si720x family offers industry-leading sensitivity, which enables use with larger air gaps and smaller magnets.

High-Sensitivity Hall Effect Sensor
Maximum BOP operating point/minim
field strength of <1.1 mT
Omnipolar or unipolar operation
Sensitivity Drift < ±3% over Temperatur
Selectable Output Options
Open-drain output
Digital high/low output
2-wire current source

Hall Effect Sensors, Silicon Labs

Specifications
Attribute Value
Mounting Type Surface Mount
Pin Count 5
Minimum Magnetic Sensor Release Point ±0.2 mT
Maximum Magnetic Sensor Operating Point ±1.1 mT
Minimum Operating Supply Voltage 1.7 V
Maximum Operating Supply Voltage 5.5 V
Length 2.9mm
Width 1.6mm
Height 1.15mm
Dimensions 2.9 x 1.6 x 1.15mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SOT-23
Automotive Standard AEC-Q100
Typical Magnetic Sensor Hysteresis 0.4 mT, 17 %
160 In stock for delivery within 7 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 4.388
(exc. GST)
$ 5.046
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$4.388
$21.94
25 - 45
$3.902
$19.51
50 - 70
$3.576
$17.88
75 - 145
$3.302
$16.51
150 +
$3.164
$15.82
*price indicative
Related Products
The SST39SF010A/020A/040 family of devices from Microchip are ...
Description:
The SST39SF010A/020A/040 family of devices from Microchip are Parallel multi-purpose Super. Flash® Memory ICs. 4.5-5.5V Read and Write Operations. Endurance – 100,000 cycles (typical)Low Power Consumption - Active Current 10 mA, Standby Current 30 μA (typical values at 14 MHz)Sector-Erase ...
Instrumentation Amplifier is a type of differential amplifier ...
Description:
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high ...
The 74HCT are a high-speed series of CMOS ...
Description:
The 74HCT are a high-speed series of CMOS devices from Diodes. Zetex. Suitable for general purpose, the logic ICs are pin compatible with low power Schottky (LSTTL). They also benefit from low power consumption. The variety of types available include ...
Low drain-source on-resistance: RDS(ON) = 0.073 Ω (typ.) ...
Description:
Low drain-source on-resistance: RDS(ON) = 0.073 Ω (typ.) by used to Super Junction Structure : DTMOSHigh-speed switching properties with lower capacitance.Enhancement mode: Vth = 2.5 to 3.5 V (VDS = 10 V, ID = 1.5 mA)Applications. Switching Voltage Regulators.