ATS468LSGTN-T Allegro Microsystems,, Transducer Hall Effect Sensor, 4-Pin SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

The ATS468 is a true zero-speed gear tooth sensor IC consisting of an optimized Hall IC and a permanent magnet pellet configuration in a single overmolded package. The integrated circuit provides a manufacturer-friendly solution for digital gear tooth sensing applications. This small package can be easily assembled and used in conjunction with gears of various shapes and sizes.

Wide operating voltage range
Peak detecting algorithm robust against signal perturbations
Capable of sensing a wide range of target types
Running mode calibration for continuous optimization
Single chip IC for high reliability
Precise duty cycle signal throughout operating temperature range
Large operating air gaps
Automatic Gain Control (AGC) for air-gap-independent switchpoints

Specifications
Attribute Value
Magnetic Type Transducer
Mounting Type Through Hole
Pin Count 4
Minimum Magnetic Sensor Release Point 3 Gs
Maximum Magnetic Sensor Operating Point 10 Gs
Minimum Operating Supply Voltage 4 V
Maximum Operating Supply Voltage 26.5 V
Length 29.45mm
Width 5.5mm
Height 5.5mm
Dimensions 29.45 x 5.5 x 5.5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
32 In stock for delivery within 7 working day(s)
Price (ex. GST) Each (In a Pack of 2)
$ 10.45
(exc. GST)
$ 12.02
(inc. GST)
units
Per unit
Per Pack*
2 - 18
$10.45
$20.90
20 - 38
$9.78
$19.56
40 - 198
$9.21
$18.42
200 - 398
$8.71
$17.42
400 +
$8.28
$16.56
*price indicative
Packaging Options:
Related Products
The AS5162 is a contactless Hall-based magnetic position ...
Description:
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect ...
Description:
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. ...
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...