DRV5033AJQLPG Texas Instruments,, Omnipolar Hall Effect Sensor Switch, 3-Pin TO-92

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

Hall Effect Switches & Latches, Texas Instruments

Integrated circuits utilising the Hall Effect to implement non-contact sensing, switching and latching functions.

Hall Effect Sensors, Texas Instruments

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point ±1 mT
Maximum Magnetic Sensor Operating Point ±12 mT
Minimum Operating Supply Voltage 2.5 V
Maximum Operating Supply Voltage 38 V
Length 4.1mm
Width 1.62mm
Height 3.25mm
Dimensions 4.1 x 1.62 x 3.25mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type TO-92
Typical Magnetic Sensor Hysteresis 3.4 mT
Price (ex. GST) Each (On a Reel of 1000)
$ 0.62
(exc. GST)
$ 0.71
(inc. GST)
units
Per unit
Per Reel*
1000 +
$0.62
$620.00
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
Infineon linear Hall effect ICs are designed for ...
Description:
Infineon linear Hall effect ICs are designed for linear position detection and current measurement applications. The Hall effect sensors may include features such as a ratiometric analogue output. The sensors can be used for applications in linear and angular position ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect ...
Description:
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. ...