AH180-PG-B DiodesZetex,, Omnipolar Hall Effect Sensor Switch, 3-Pin SIP

  • RS Stock No. 170-8978
  • Mfr. Part No. AH180-PG-B
  • Manufacturer DiodesZetex
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Hall Effect Switches & Latches, Diodes Inc

Hall Effect Sensors, Diodes Inc

A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 20 Gs
Maximum Magnetic Sensor Operating Point 60 Gs
Minimum Operating Supply Voltage 2.5 V
Maximum Operating Supply Voltage 5.5 V
Length 4.3mm
Width 1.6mm
Height 3.2mm
Dimensions 4.3 x 1.6 x 3.2mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 15 Gs
3000 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Bag of 1000)
$ 0.786
(exc. GST)
$ 0.904
(inc. GST)
units
Per unit
Per Bag*
1000 +
$0.786
$786.00
*price indicative
Related Products
Omnipolar detection Hall ICs can detect both S-and ...
Description:
Omnipolar detection Hall ICs can detect both S-and N-pole magnetic fields, simplifying magnet management. Omnipolar detection. Micropower operation (small current using intermittent operation method)Ultra-compact CSP4 package. For 1.8V Power supply voltage. Low sensitivity (BOP TYP +/-6.3mT)High ESD resistance ...
The omnipolar Hall ICs are magnetic switches that ...
Description:
The omnipolar Hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from Hi to Low. In addition to regular single-output Hall ICs, We offer a lineup of dual-output units with a reverse output ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing. Laser trimmed thin and thick film resistors-40 to 125°C operating ...
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide ...
Description:
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, ...