A1220LUA-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems

The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.

A south pole turns on the output and a north pole turns off the output.

The voltage regulator permits operation with supply voltages of 3 V to 24 V.

Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.

AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -40 Gs
Maximum Magnetic Sensor Operating Point 40 Gs
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 45 Gs
500 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Bag of 500)
Was $1.964
$ 1.227
(exc. GST)
$ 1.411
(inc. GST)
units
Per unit
Per Bag*
500 +
$1.227
$613.50
*price indicative
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing. Laser trimmed thin and thick film resistors-40 to 125°C operating ...
A range of linear output Hall Effect sensor ...
Description:
A range of linear output Hall Effect sensor ICs, designed for position and proximity sensing from Diodes Inc.
Description:
Allegro Current sensor ICs in CA and CB packages. Conductor resistance of 100 μΩ typical for ultra low-power loss. Automotive grade options for harsh applications environments3000 Vrms galvanic isolation.
3.0 V to 26 V operating supply voltage. ...
Description:
3.0 V to 26 V operating supply voltage. Low current consumption 1.6 mAESD protection 4 kV HBMOperating from unregulated power supply. Output overcurrent & overtemperature protection. Active error compensation (chopping)High stability of magnetic thresholds. Operating temperature range from -40 °C ...