2-pin speed only with current output

  • RS Stock No. 190-9744
  • Mfr. Part No. VM721V1
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Integrated speed sensor IC
Pole size independent operation
2-pin current interface
-40°C to 150°C operating temperature range
Zero speed operation
No calibration required
Insensitive to mechanical vibration
Protection against reverse polarity
Integral capacitor
Vibration rejection
Applications
Transmission speed and direction sensing
Direction for Anti-lock Brake Systems (ABS) and auto parking

Specifications
Attribute Value
Mounting Type Through Hole
Pin Count 2
Minimum Magnetic Sensor Release Point -30 Gs
Maximum Magnetic Sensor Operating Point +30 Gs
Minimum Operating Supply Voltage 4 V
Maximum Operating Supply Voltage 9 V
Length 5.13mm
Width 1.6mm
Height 3.46mm
Dimensions 5.13 x 1.6 x 3.46mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
Automotive Standard AEC-Q100
500 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Bag of 500)
$ 5.283
(exc. GST)
$ 6.075
(inc. GST)
units
Per unit
Per Bag*
500 - 500
$5.283
$2,641.50
1000 +
$5.155
$2,577.50
*price indicative
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing. Laser trimmed thin and thick film resistors-40 to 125°C operating ...
The AS5047D is a high-resolution rotary position sensor ...
Description:
The AS5047D is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. The integrated circuit is a 14-bit on-axis magnetic rotary position sensor with 11-bit decimal and binary incremental pulse count. DAEC Dynamic Angle ...
The ATS468 is a true zero-speed gear tooth ...
Description:
The ATS468 is a true zero-speed gear tooth sensor IC consisting of an optimized Hall IC and a permanent magnet pellet configuration in a single overmolded package. The integrated circuit provides a manufacturer-friendly solution for digital gear tooth sensing applications. ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
Description:
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.A south pole ...