A3213EUA-T Allegro Microsystems, Omnipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

A3213/4 Micropower Ultrasensitive Hall Effect Switches, Allegro Microsystems

The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 μW (typical, at 2.75 V).

Either a north or south pole turns on the output.

They include a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

AEC-Q100 automotive qualified
Micropower operation
Superior temperature stability
Low switchpoint drift
Insensitive to physical stress
High ESD protection

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -70 Gs
Maximum Magnetic Sensor Operating Point 70 Gs
Minimum Operating Supply Voltage 2.4 V
Maximum Operating Supply Voltage 5.5 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type Ultra Mini SIP
Typical Magnetic Sensor Hysteresis 10 Gs
100 : Next working day
680 Within 7 working day(s) (Global stock)
Price (ex. GST) Each (In a Pack of 5)
$ 2.04
(exc. GST)
$ 2.35
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$2.04
$10.20
25 - 95
$1.966
$9.83
100 - 245
$1.784
$8.92
250 - 495
$1.698
$8.49
500 +
$1.60
$8.00
*price indicative
Packaging Options:
Related Products
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...