A1220EUA-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems

The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.

A south pole turns on the output and a north pole turns off the output.

The voltage regulator permits operation with supply voltages of 3 V to 24 V.

Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.

AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -40 Gs
Maximum Magnetic Sensor Operating Point 40 Gs
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 45 Gs
15 : Next working day
90 Within 5 working day(s) (Global stock)
Price (ex. GST) Each (In a Pack of 5)
$ 2.068
(exc. GST)
$ 2.378
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$2.068
$10.34
25 - 95
$1.628
$8.14
100 - 245
$1.386
$6.93
250 - 495
$1.366
$6.83
500 +
$1.23
$6.15
*price indicative
Packaging Options:
Related Products
The ATS468 is a true zero-speed gear tooth ...
Description:
The ATS468 is a true zero-speed gear tooth sensor IC consisting of an optimized Hall IC and a permanent magnet pellet configuration in a single overmolded package. The integrated circuit provides a manufacturer-friendly solution for digital gear tooth sensing applications. ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing. Laser trimmed thin and thick film resistors-40 to 125°C operating ...
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...
Description:
Allegro Current sensor ICs in CA and CB packages. Conductor resistance of 100 μΩ typical for ultra low-power loss. Automotive grade options for harsh applications environments3000 Vrms galvanic isolation.