AH1751-PG-A-A DiodesZetex,, Bipolar Latch Hall Effect Sensor, 3-Pin SIP-3

  • RS Stock No. 712-2841
  • Mfr. Part No. AH1751-PG-A-A
  • Manufacturer DiodesZetex
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Hall Effect Switches & Latches, Diodes Inc

Hall Effect Sensors, Diodes Inc

A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Bipolar Latch
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -70 Gs
Maximum Magnetic Sensor Operating Point 70 Gs
Minimum Operating Supply Voltage 3.5 V
Maximum Operating Supply Voltage 20 V
Length 4.3mm
Width 1.6mm
Height 3.2mm
Dimensions 4.3 x 1.6 x 3.2mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SIP-3
Typical Magnetic Sensor Hysteresis 75 Gs
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each (In a Pack of 10)
$ 1.44
(exc. GST)
$ 1.66
(inc. GST)
units
Per unit
Per Pack*
10 - 10
$1.44
$14.40
20 - 90
$1.421
$14.21
100 - 190
$1.392
$13.92
200 - 390
$1.373
$13.73
400 +
$1.361
$13.61
*price indicative
Packaging Options:
Related Products
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing. Laser trimmed thin and thick film resistors-40 to 125°C operating ...
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide ...
Description:
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity ...