AH1895-Z-7 DiodesZetex, Omnipolar Hall Effect Sensor Switch, 5-Pin SOT-553

  • RS Stock No. 828-3411
  • Mfr. Part No. AH1895-Z-7
  • Manufacturer DiodesZetex
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hall Effect Switches & Latches, Diodes Inc

Hall Effect Sensors, Diodes Inc

A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 5
Minimum Magnetic Sensor Release Point -65 Gs
Maximum Magnetic Sensor Operating Point -40 Gs, 80 Gs
Minimum Operating Supply Voltage 1.6 V
Maximum Operating Supply Voltage 3.6 V
Length 1.7mm
Width 1.25mm
Height 0.62mm
Dimensions 1.7 x 1.25 x 0.62mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SOT-553
Typical Magnetic Sensor Hysteresis 10 Gs
900 In stock for delivery within 7 working day(s)
Price (ex. GST) Each (In a Pack of 20)
$ 0.81
(exc. GST)
$ 0.93
(inc. GST)
units
Per unit
Per Pack*
20 - 80
$0.81
$16.20
100 - 180
$0.717
$14.34
200 - 480
$0.715
$14.30
500 - 980
$0.695
$13.90
1000 +
$0.651
$13.02
*price indicative
Packaging Options:
Related Products
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, ...
The omnipolar Hall ICs are magnetic switches that ...
Description:
The omnipolar Hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from Hi to Low. In addition to regular single-output Hall ICs, We offer a lineup of dual-output units with a reverse output ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...
The Allegro Microsystems A1126 is an omnipolar, ultrasensitive ...
Description:
The Allegro Microsystems A1126 is an omnipolar, ultrasensitive Hall-effect switch with a digital output. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output.This device has an integrated regulator ...