TLE49762KHTSA1 Infineon,, Unipolar Hall Effect Sensor Switch, 3 → 24 V, 3-Pin SC-59

  • RS Stock No. 857-8879
  • Mfr. Part No. TLE49762KHTSA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Unipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point 2.1 mT
Maximum Magnetic Sensor Operating Point 5.1 mT
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 24 V
Length 3mm
Width 1.6mm
Height 1.1mm
Dimensions 3 x 1.6 x 1.1mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SC-59
Typical Magnetic Sensor Hysteresis 1.8 mT
On back order for despatch 13/10/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (On a Reel of 3000)
$ 0.492
(exc. GST)
$ 0.566
(inc. GST)
units
Per unit
Per Reel*
3000 - 3000
$0.492
$1,476.00
6000 - 12000
$0.489
$1,467.00
15000 +
$0.485
$1,455.00
*price indicative
Related Products
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
Description:
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.A south pole ...