Honeywell Ratiometric Hall Effect Sensor switching current 1.5 mA supply voltage 4.5 → 10.5 V dc

  • RS Stock No. 169-7675
  • Mfr. Part No. SS496A1
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Miniature Ratiometric Linear Hall Effect Sensors

Hall effect sensors with output proportional to supply voltage and the strength of the magnet field
Single current sinking or current sourcing linear output
Rail-to-rail operation provides more useable signal for higher accuracy
Responds to either positive or negative gauss
Good temperature stability
Typical applications include; current sensor, motor control, position control, encoder, metal detection, vibration sensor etc

Specifications
Attribute Value
Output Type Ratiometric
Supply Voltage 4.5 → 10.5 V dc
Terminal Type PCB
Switching Current 1.5 mA
Length 4.06mm
Width 3mm
Depth 1.6mm
Dimensions 4.06 x 3 x 1.6 mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
On back order for despatch 16/12/2019, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Bag of 5000)
$ 3.366
(exc. GST)
$ 3.871
(inc. GST)
units
Per unit
Per Bag*
5000 +
$3.366
$16,830.00
*price indicative
Related Products
ABS housing. Open collector PNP + NPN Output. ...
Description:
ABS housing. Open collector PNP + NPN Output. Normally open contact with bounce free operationLED indication of alignment and diagnosis. Specified magnet assembly must be used with this sensor. Sealed to IP65Cable length 145mm. Dimensions 32 x 24 x 10 ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing. Laser trimmed thin and thick film resistors-40 to 125°C operating ...
2 output styles; 5V logic (pull-down) or PNP+ ...
Description:
2 output styles; 5V logic (pull-down) or PNP+ NPN (N/O)LED indication of alignment and diagnosis. Matching magnet assembly must be used M12 thread. Cable length 300mm.
Sensor for pneumatic cylinders. Records the ring magnets ...
Description:
Sensor for pneumatic cylinders. Records the ring magnets in the cylinder pistons. Precise recording of position by means of accurate switching points. Output: N/OOutput current max. 100 mAResponse threshold 2.1 mTTraverse speed > 10 m/s. Polarity reversal protectionLED status display. ...