GDM Series Unequipped Circuit Board for use with GDM Series Rectangular Connector

  • RS Stock No. 168-5611
  • Mfr. Part No. 931 954-001
  • Manufacturer Hirschmann
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

GDME Series

2P+E

Note

These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment.

Approvals

UL recognised component, CSA certified, VDE

Type A DIN 43650 Hirschmann

A comprehensive range of cable sockets, appliance connector bases and accessories typically for use with solenoid valves on pneumatic and hydraulic equipment. The inner connector can be rotated through 90° increments so the gland can be positioned in all four directions. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.,All are supplied complete with centre retaining screw, while plug bases are solder terminated and supplied with fixing screws. Suitable gasket to provide IP65 sealing, stock-no. 156-4729. Supplied in bags of 10

Specifications
Attribute Value
Accessory Type Unequipped Circuit Board
For Use With GDM Series Rectangular Connector
Series GDM
On back order for despatch 16/04/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Bag of 50)
$ 4.577
(exc. GST)
$ 5.264
(inc. GST)
units
Per unit
Per Bag*
50 +
$4.577
$228.85
*price indicative
Related Products
Adaption circuit board for 14-pin sockets with a ...
Description:
Adaption circuit board for 14-pin sockets with a distance of 7.62 mm. Epoxy fibre-glass FR4 1.50 mm. Double-sided 35 μm Cu. Plated through holes (PTH)Hot air leveling (HAL leadfree)Solder stop mask. Hole spacing 2.54 mm7 three-hole-pads and 2 x 7 ...
Adaption circuit board for DFN10 and eMSOP10 with ...
Description:
Adaption circuit board for DFN10 and eMSOP10 with 0.50 mm pitch. Epoxy fibre-glass FR4 1.50 mm. Double-sided 35 μm Cu. Plated through holes (PTH)Surface chem. Ni/Au. Solder stop mask. Hole spacing 2.54 mm. Shield pad and cooling pad.
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...