Schneider Electric Inverter Drive, 3-Phase In, 0 200Hz Out 1.5 kW, 400 V ac with EMC Filter, 3.7 A ALTIVAR 212

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): MA
Product Details

Altivar ATV212 Variable Frequency Drive (VFD)

The Altivar ATV212 inverter drive is a recent updated version of the earlier version ATV21 variable speed motors from Schneider Electric. This VFD drive has an output frequency control of 0.5 to 200Hz, The Altivar 212 HVAC drive has been built for performance, intelligence and protection.

Features and Benefits

• It’s important that the drive is mounted in a dust and damp proof enclosure whilst in certain environment such as dust, corrosive gases, and high humidity also around any dripping or splashing liquid. This is to protect the drive and to ensure that whilst in the enclosure the maximum internal temperature can reach 50 °C. To help encourage efficient circulation, we recommend that you fit ventilation grills and remove the blanking cover from the top of the drive. Please refer to the datasheet for more information regarding this.
• The communication service allows the user to monitor inhibitable, read device identification, read holding registers, configure a time out setting, and write multiple registers and write a single register.
• Features an integrated class C2 EMC filter.
• The Altivar is a frequency controller for a three phase, squirrel cage motor.
• Available as standard IP21 and IP55 protection
• Electrostatic discharge immunity test level 3, conforming to IEC 61000-4-2.
• Less than 35% THDi harmonics due to Innovative C-less technology
• Embedded Building management communication protocols.
• Incorporates 3 logic inputs, 2 analogue inputs, 2 logic outputs and one configurable analogue output.

Typical Applications

• Typically used in industrial and commercial applications, mainly focusing on ventilation due to the lack of airdraulic noise and motor noise.
• Smoke extraction which has a forced start with fault inhibition.
• Heating and Air conditioning, because of the optimised control in fluid processing and adjustable flow rates which improves energy management.
• Pumping, useful in this application because of the multi-motor configuration and sleep/wake function. Alongside the detection of underload/over load.

When do the cooling fans on the ATV212 VFD switch on?

The fan control strategy of the ATV212 means that the fans will start when the drive is in the “RUN” state. The fan will then stop after the “STOP” command has been given. There may be a time delay because of the thermal state.

Specifications
Attribute Value
Power Rating 1.5 kW
Phase 3
Supply Voltage 400 V ac
Current Rating 3.7 A
Output Frequency 0 200Hz
For Use With Asynchronous Motors
Ambient Temperature 0 +40°C
Overall Width 105mm
Overall Length 143mm
Overall Depth 150mm
Control Panel Yes
Field Bus Communication Type Apogee P1, BACnet, Metasys N2, Modbus
Filter Included Yes
Series ALTIVAR 212
IP Rating IP20
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 991.49
(exc. GST)
$ 1,140.21
(inc. GST)
units
Per unit
1 +
$991.49
Related Products
Unidrive M200 connects with many of the common ...
Description:
Unidrive M200 connects with many of the common field buses using the modular ’SI’ interface port. It can communicate with SI-Ethernet, SI-EtherCAT, SI-PROFINET, SI-PROFIBUS, SI-CAN open and SI-Device. Net. The RFC-A mode means you’ll benefit from consistent running speeds, at ...
The Siemens Micromaster 440 is an AC vector ...
Description:
The Siemens Micromaster 440 is an AC vector drive designed for automation applications that require broad functionality and dynamic response. The Micromaster 440 features an integrated brake chopper and has the ability to stop at a target position without an ...
The ACS150 brings a level of programmability to ...
Description:
The ACS150 brings a level of programmability to the micro drive. Programming is via parameters arranged together into easy to follow logical groups, and arranged into a 2 level menu (short and long view). A built-in low-cost keypad allows access ...
The standard configuration of the FR-700 has a ...
Description:
The standard configuration of the FR-700 has a serial interface (RS485) which meals that this VDF allows communication with a PLC and a PC, with this range Mod. Bus RTU is also supported. Because this model in in compliance with ...