Mobrey Horizontal, Vertical Mounting Level Switch Relay Output

  • RS Stock No. 511-5157
  • Mfr. Part No. VLSKB131Z
  • Manufacturer Mobrey
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Mobrey Level Switch

The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay.

Supplied with:
User manual, 2 – 3-pole terminal blocks, 1in sealing, 2 – Pg 16 cable glands.

How do you carry out an installation?
Requiring only a 1in BSP/NPT socket, either on the top or in the sidewall of the silo, the unit is easy to install and simple to the commission.
Prior to installation, it is advised to check the switching function for proper adjustment on a sample quantity of material. The unit may not work with mediums within specified density range but having a very large size of granules or extremely little friction.

WARNING!
Handle device with great care, especially the sensing probe. Any impact on the sensing probe can ruin its resonance system.
A protective shield should be installed if the probe is exposed to falling material or an excessive mechanical load.

Features and Benefits

Standard model with 1 x SPDT alarm relay
It has an operating voltage of 20VAC/DC to 255VAC/DC
Housing standard is aluminium alloy with powder coated
Standard R 1-1/2in BSPT mounting connection

Free-flowing solids and it eliminates the clogging and ridging problems associated with forks
Rod design prevents product bridging
External LED switch status indication display and the probe is maintenance free
Relay output
Compact and rugged design and relay output

Applications

It is designed to provide high or low-level switching in silos or bins containing free-flowing powders and granular materials such as carbon black, sugar, grain, cement, lime and sand with a material bulk density on 50 kg/m3 or more
Vibrating Liquid/Solid
Level Probes - Squings

Certifications

ATEX II 1/2 D
IP67 rated

Specifications
Attribute Value
Device Type Solids Level Switch
Mounting Type Horizontal, Vertical
Switch Output Relay
Body Material Aluminium Alloy
Minimum Operating Temperature -20°C
Maximum Operating Temperature +110°C
Maximum Current 8 A
Maximum Pressure 10bar
8 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 870.03
(exc. GST)
$ 1,000.53
(inc. GST)
units
Per unit
1 +
$870.03
Related Products
The Cynergy3 RSF66P series float switch is a ...
Description:
The Cynergy3 RSF66P series float switch is a vertical mount type and has NO/NC output configuration. This float switch has a polyphenylene sulphide body. The switch has an upper level is 30mm and the lower level is 175mm. It is ...
The Flowline level switch provides high or low ...
Description:
The Flowline level switch provides high or low liquid level detection of relatively clean water and chemical solutions with a 15VA reed switch output. Media examples include potable water and boric acid. The baffle body eliminates level switch chatter caused ...
Flowline Echo. Pod UG01 & UG03 general purpose ...
Description:
Flowline Echo. Pod UG01 & UG03 general purpose reflective ultrasonic multi function level transmitter provide continuous level measurement up to 3 m. 4 mA to 20 mA analogue signal output and four relay outputs are configurable via Flowline Web. Cal ...
The Mobrey ultrasonic liquid level switch with polyphenylene ...
Description:
The Mobrey ultrasonic liquid level switch with polyphenylene sulphide construction has output type integral SPCO relay (energised when the sensor is wet) and 1-in BSPT dual mount thread. This switch is designed for high or low-level alarm duties to give ...