Cynergy3 RSF80 Series Horizontal External Mounting Level Switch NO/NC Output

  • RS Stock No. 756-4289
  • Mfr. Part No. RSF88H100R
  • Manufacturer Cynergy3
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Cynergy3 Float Switch

The Cynergy3 float switch is designed for RSF mounting through the wall of a tank, via a in thread without requiring access to NPT the inside of the tank. This switch can be fitted to achieve either make on the rising (N/O) or make on fall (N/C) action by simply rotating it through 180°. It has a maximum power of 100VA. The switch action can be reversed by mounting the float switch, with the float able to move upwards away from the body instead of downwards.
WRAS approval explained
WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have appropriate quality and standard.
What materials can you choose from?
Polypropylene Sulfide (PPS)
Suitable for signal switching and use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e. G. filament lamps) loads.
This float switch is designed for mounting through the outside wall of a tank using an INNPT or BSP threaded hole or boss.
Polypropylene material
INNPT or inBSP external mounting
100cm PVC flying leads
Product application information:
This polypropylene float switch is most suitable for use in water, detergents, vegetable oils, some organic and inorganic chemicals. Typical applications include diesel generators, hydraulic oil and gearbox oil levels.

Features and Benefits

Choice of gasket materials: silicone, nitrile, Viton or combination of silicone and nitrile
Flying lead
Cable length of 1m
Maximum current of 1A
External fitting inside a tank
M12 plug connection


Diesel generators
Hydraulic oil and gearbox oil levels


UL approved
WRAS and NSF approved
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Attribute Value
Device Type Sensor
Mounting Type Horizontal External
Switch Output NO/NC
Body Material Polypropylene
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Maximum Current 1 A
Series RSF80
10 : Next working day
60 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 33.20
(exc. GST)
$ 38.18
(inc. GST)
Per unit
1 - 5
6 - 24
25 +
Related Products
The MS series of cable end float switches ...
The MS series of cable end float switches are designed for controlling levels in large tanks, cisterns or reservoirs. These level switches can be directly installed on submersible pumps, making them perfect for any water projects. This casing is made ...
Ball type float switch. Intrinsically Safe NAMUR Output. ...
Ball type float switch. Intrinsically Safe NAMUR Output. Closes Floating Up (make switch)Polypropylene Float. Density: ≥0.6g/cm35 Metres PVC (2 x 0.75mm2) Cable. Can Only Be Used With a Galvanic Isolation Barrier.
FFSMC submerged-type float switches may be used in ...
FFSMC submerged-type float switches may be used in environments where wide and/or rapid fluctuations in ambient fluid temperature occur. The blue polyurethane-bodied model (361-1833) is suitable for use within sewers and industrial waste systems. The design incorporates a self-weighted cable ...
These SSF67 series floats from Cynergy 3 have ...
These SSF67 series floats from Cynergy 3 have been designed to provide different switching options with a longer reach float. The float is made with stainless steel 316L making it suitable to use with aggressive liquids and in applications where ...