Vega VEGAWAVE 61 Series Cable Mounting Vibrating Level Switch Relay Output ATEX

  • RS Stock No. 768-2000
  • Mfr. Part No. WAVES61.EEJ2RA
  • Manufacturer Vega
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): DE
Product Details

'VEGAWAVE 61' Vibrating Level Switch for Solids

Ideal level switch for almost all bulk solids applications. It detects light bulk solids, even those down to 8 g/l, particularly well, the robust construction also makes it possible to use it in very heavy media.

Easy set-up without adjustment
Product-independent switching point
Rugged sensor construction
Insensitive to build-up and statically charged products
Solid densities from 8 g/l reliably detected
Wear- and maintenance-free
External LED switch
Housing material PBT (plastic)
Housing protection IP66/7
Typical applications are overfill and low level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides

Vega Vibrating Level Switch

The Vega vibrating level switch has a relay (DPDT) output. It is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by the product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two-colour LED. Vibrating Liquid/Solid Level Probes - Squings.
All of these probes are maintenance-free and have an external LED switch status indication.

Features and Benefits

• The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC
• Process fitting material is thread G1 PN25, DIN3852-A

Easy setup without adjustment
• Product-independent switching point
• Rugged sensor construction
• Insensitive to build-up and statically charged products
• Solid densities from 8g/l reliably detected
• maintenance-free and does not wear out easily
• External LED switch
• Housing material PBT (plastic)
• Density is greater than 100g/l
• Breaking capacity maximum 750VA, 54W

Applications


Typical applications are overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides
• Almost all the bulk solids applications

Certifications

• IP66 rated
• IP67 rated
• ATEX II 1/3 D IP6X T

Vibrating Liquid/Solid Level Probes - Squings

All of these probes are maintenance free and have external LED switch status indication

Specifications
Attribute Value
Device Type Vibrating Level Switch
Mounting Type Cable
Switch Output Relay
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Maximum Current 1 A dc, 3 A ac
Maximum Pressure 1.1bar
Hazardous Area Certification ATEX
Series VEGAWAVE 61
5 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 907.87
(exc. GST)
$ 1,044.05
(inc. GST)
units
Per unit
1 +
$907.87
Related Products
Rugged fill level measurement in fluid media. Small, ...
Description:
Rugged fill level measurement in fluid media. Small, compact design, no medium calibration required. Process temperature up to 55 °C, process pressure up to 16 bar. Process connection G Highly medium resistant due to stain-less steel housing 1.4404, polysul-fone apex. ...
CE marked in compliance with relevant European Directives. ...
Description:
CE marked in compliance with relevant European Directives. Sensing range 2 to 10mm adjustable via a single turn potentiometerLED indication when activated. Output: DC 100mA transistor. Power ON delay; Max 40ms (No delay version), Max 5s (ON/OFF delay versions)Supply voltage; ...
Can be mounted in any position. High chemical ...
Description:
Can be mounted in any position. High chemical corrosion resistance. Resistance to product build-up. Output current sink 40mA max up to 30Vdc. Housed in Polyethersulfone body. Viton O'ring seal. Lead length 150mm.
Accessories including Compact Support assembly components, and electrode ...
Description:
Accessories including Compact Support assembly components, and electrode components, specifically for use with ABB conductive Liquid Level Relays. Monitoring and control of liquid levels. Protection of pumps against dry running. Ability to detect liquid leaks in a system. Control of ...