Royce Thompson Electric 250mW Lighting Controller Switch, Filtered Silicon Photodiode, 220 → 270 V ac

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Integral Luminaire Controller

Supplied with 2 nitrile gaskets and 20mm lock ring

Daylight Lighting Controllers

These controllers automatically turn lights 'ON' and 'OFF' in response to changes in ambient light levels, primarily the transition from day to night and vice-versa. The more advanced types (see note below) have inbuilt logic to minimise false triggering, whereas the remainder have inbuilt time delays or higher 'OFF' thresholds, to prevent on/off cycling. As a general rule, these controllers should be sited such that they are not illuminated, by the light they are controlling. Nominal supply voltage is 230Vac.,Note regarding energy-saving negative-hysteresis controllers,Where figures for the 'OFF' threshold are lower than for the 'ON' threshold, the sensor is designed such that four thresholds are actually monitored. These are: dusk, the middle of the night, dawn and the middle of the day. Monitoring at times other than dusk and dawn enables the sensor to determine what it should be looking for next, minimising false triggering and improving overall controller operation.

Specifications
Attribute Value
Controller Type Switch
Sensor Type Filtered Silicon Photodiode
Voltage Rating 220 → 270 V ac
Power Consumption 250mW
Length 57 mm
Width 31 mm
Height 25mm
13 : Next working day
136 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 85.84
(exc. GST)
$ 98.72
(inc. GST)
units
Per unit
1 +
$85.84
Related Products
Micro-controller based circuitry to provide electronic soft-start and ...
Description:
Micro-controller based circuitry to provide electronic soft-start and overload protection. Suitable for use with tungsten GLS lamps, mains halogen lamps and for dimming low voltage lighting when used with electronic or wire wound LV transformers. Antimicrobial properties which inhibit the ...
The Busch Venetian Blind Controller II is suitable ...
Description:
The Busch Venetian Blind Controller II is suitable for blinds, Venetian blinds and awnings with mechanical or electronic end-position detection. Two 230V extension inputs (up/down) for group control. For use with blind control up/down switch cover 6430-214-102 (790-3105)Connection options for ...
A long range microwave detector designed for use ...
Description:
A long range microwave detector designed for use in applications such as warehouses, sports halls, churches etc. Sealed enclosure with a stainless steel detachable bracket for mounting to wall or ceiling with an adjustable angle. Simplified installation with integral sensor ...
Wireless PIR motion sensors function as a presence ...
Description:
Wireless PIR motion sensors function as a presence or absence detector and can turn lights on when a room is occupied or off when the room is empty. All units contain a built in RF transceiver capable of receiving input ...