Phoenix Contact 2981716 Blind Plug, For Use With PSR Downtime/Speed Monitors

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Multi-application Modular System - PSR-SPP Series

This can be quickly and reliably assembled to form a tailor-made safety solution. To connect using TBUS correctly you will need one PSR-TBUS per module. For the last additional module use one PSR-TBUS-TP instead, this will close the feedback loop. The interface module is used for the connection of up to four safety sensors with NC/NO contacts to the safety relay PSR-SDC4, with screw connection.

Features and Benefits

Quick system extension up to 10 modules, offering a safety system with up to 42 contacts
Automatic identification of desired operating mode, no need to set switches or define parameters
The system is based on a master relay (PSR-SDC) that monitors e-stops, guard doors (interlock or non-contact) and optical devices (e.g. light curtains)
Safe cross-wiring with T-BUS renders the usual cross-wiring of supply voltage, enable signal and confirmation path redundant. Making commissioning and future expansion simple
24Vdc supply voltage
Semiconductor output
Depending on the wiring Safety category 2 or 4 can be maintained
One or Two channel switches are used for control
Note: The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP

Note

The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP.

Specifications
Attribute Value
Accessory Type Blind Plug
For Use With PSR Downtime/Speed Monitors
45 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 36.20
(exc. GST)
$ 41.63
(inc. GST)
units
Per unit
1 +
$36.20
Related Products
Suitable for use with the m. Gard Trapped ...
Description:
Suitable for use with the m. Gard Trapped Key range and the Am. Gard Machine Guard switch range. Stainless steel construction and individually coded keys:492-2976 code A492-3165 code B492-3171 code C492-3187 code D492-3193 code E492-3216 code F492-3222 code G492-3238 code ...
Long life - up to 1 million mechanical ...
Description:
Long life - up to 1 million mechanical operations. Double insulated3 cable entries M16 x 1.5Large wiring compartment. High level of contact reliability with low voltages and currents. Patented roller system - not sensitive to dirty conditions. Slotted holes for ...
Long life - up to 1 million mechanical ...
Description:
Long life - up to 1 million mechanical operations. Double insulated3 cable entries M16 x 1.5Large wiring compartment. High level of contact reliability with low voltages and currents. Patented roller system - not sensitive to dirty conditions. Slotted holes for ...
Two switches in one enclosure. Problem free opening ...
Description:
Two switches in one enclosure. Problem free opening of stressed doors by means of bell-crank system. Robust design. Long life - up to 1 million mechanical operations. High holding force of 3500 NAdjustable ball latch to 400 N2 cable entries ...