Phoenix Contact 2890425 Connector, For Use With PSR Downtime/Speed Monitors

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Multi-application Modular System - PSR-SPP Series

This can be quickly and reliably assembled to form a tailor-made safety solution. To connect using TBUS correctly you will need one PSR-TBUS per module. For the last additional module use one PSR-TBUS-TP instead, this will close the feedback loop. The interface module is used for the connection of up to four safety sensors with NC/NO contacts to the safety relay PSR-SDC4, with screw connection.

Features and Benefits

Quick system extension up to 10 modules, offering a safety system with up to 42 contacts
Automatic identification of desired operating mode, no need to set switches or define parameters
The system is based on a master relay (PSR-SDC) that monitors e-stops, guard doors (interlock or non-contact) and optical devices (e.g. light curtains)
Safe cross-wiring with T-BUS renders the usual cross-wiring of supply voltage, enable signal and confirmation path redundant. Making commissioning and future expansion simple
24Vdc supply voltage
Semiconductor output
Depending on the wiring Safety category 2 or 4 can be maintained
One or Two channel switches are used for control
Note: The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP

Note

The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP.

Specifications
Attribute Value
Accessory Type Connector
For Use With PSR Downtime/Speed Monitors
Connector Type Straight Female
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 27.41
(exc. GST)
$ 31.52
(inc. GST)
units
Per unit
1 +
$27.41
Related Products
Phoenix contact M12 Speedcon connectors, these 3 ways ...
Description:
Phoenix contact M12 Speedcon connectors, these 3 ways Y or T distribution connector are IP67 rated once mated and have a PG9 or M12 fastening thread, suitable for many applications that demand a robust multiple connections.
Professional range of Phoenix Contact D-Sub connectors and ...
Description:
Professional range of Phoenix Contact D-Sub connectors and accessories from the VS series. Various accessories include mouting frames, cap nuts and protective covers. Crimp or Solder pins. Various positions available.
Phoenix Contact PSBJ range of test sockets for ...
Description:
Phoenix Contact PSBJ range of test sockets for use with DIN rail terminal blocks. The PSBJ test sockets are used in place of the normal bridge screw and ensures the voltage pick-off on a bridged group of terminals.
Phoenix Contact labelling cards & markers are offered ...
Description:
Phoenix Contact labelling cards & markers are offered in a comprehensive amount of options to ensure your application is covered. Available in various sizes, colours and materials.