Legris Manual Ball Valve Brass 1/2 in G 2 Way

  • RS Stock No. 283-0178
  • Mfr. Part No. 0432 13 21
  • Manufacturer Legris
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

In-Line Valves

Valve lockable in open or closed position
When plate fixed to valve body and plate attached to valve stem are padlocked together, valve handle cannot be operated

//media.rs-online.com/t_line/L282650-01.gif
//media.rs-online.com/t_line/L283016-01.gif

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Specifications
Attribute Value
Attachment Type Threaded
Threaded Connection 1/2 in G
Body Material Brass
Thread Size 1/2in
Safe for Use With Water
Maximum Working Pressure 40 bar
Connection Size mm 15mm
Connection Size inch 1/2in
Type 2 Way
16 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 125.90
(exc. GST)
$ 144.78
(inc. GST)
units
Per unit
1 - 5
$125.90
6 - 11
$122.55
12 +
$120.26
Related Products
Designed for use with aggressive fluids in corrosive ...
Description:
Designed for use with aggressive fluids in corrosive environments. Suited to higher pressure and temperature applications. One piece full bore construction. Operating Temperature to +200°C’O’ rings: Viton rubber.
S.100/101 reduced bore ball valves with either 'L' ...
Description:
S.100/101 reduced bore ball valves with either 'L' or 'T' port configuration. The valves are suitable for oil, air, water, saturated steam or high temperature hot water services in domestic, commercial and industrial applications. T-Port Configuration Valves are:• 486-243 - ...
WRC approved. Brass chromium plated reduced bore ball ...
Description:
WRC approved. Brass chromium plated reduced bore ball valves manufactured to BS6675Used for isolating hot or cold water systems, to carry out repairs or replacements, without affecting the rest of the system and without having to drain down large volumes ...
A 2/2 way ball valve with a hand ...
Description:
A 2/2 way ball valve with a hand lever and female thread at both ends. Available in a range of thread sizes from G G1. Female thread with hand lever. Air and water operating mediums. Brass housing. Large operating temperature ...