RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

222-2991, Double Sided DIN 41612 Matrix Board FR4 with 1mm Holes 2.54 x 2.54mm Pitch, 160 x 100 x 1.6mm


2 In stock for delivery within 7 working day(s)
Add to Basket

Price (ex. GST) Each

$141.24

(exc. GST)

$162.43

(inc. GST)

units

Added

RS Stock No.:
435-642
Mfr. Part No.:
222-2991
Manufacturer:
Vero Technologies
COO (Country of Origin):
GB
unitsPer unit
1 - 9$141.24
10 - 19$139.27
20 - 49$136.92
50 +$132.15

Double-Sided Microboards PTH


The component side of the card features a colander ground plane which assists glitch free high speed operation by dissipating switching spikes.
This ground plane is solder resist coated and screen printed in yellow, except for the region of the 0V rails which align with the 0 Volt rails on the wiring side for simple through connection.


DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

AttributeValue
Number of SidesDouble Sided
Hole Pitch2.54 x 2.54mm
Dimensions160 x 100 x 1.6mm
Length160mm
Width100mm
Thickness1.6mm
Base MaterialEpoxy Glass Fabric Laminate
Hole Diameter1mm
FR Material GradeFR4
Copper Thickness35µm
ConnectionDIN 41612