RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Molex, 91228 6 Way Push/Push Memory Card Connector With Solder Termination

This image is representative of the product range


Discontinued product
RS Stock No.:
487-9349
Mfr. Part No.:
91228-3001
Manufacturer:
Molex

Molex ChipSIM Connectors and Cardholders - 91228 and 91236 Series


ChipSIM connectors (series 91228) and card holders (series 91236) designed for use with removable SIM cards in GSM (Global System for Mobile) communications-based systems. The ChipSim connectors feature a push button ejection mechanism for easy insertion or removal of the SIM card from the card holder. The terminals have a lead-in design which prevents stubbing during card insertion. A gold plated interface provides high durability allowing up to 5000 cycles. A back stop locates the card holder in the connector. These ChipSIM connectors are available with PCB alignment pegs and a range of button colours.
The card holders feature an active latch which prevents the SIM card from backing out from the connector due to vibration. A button must be pressed to release the latch. The card holders also have polarization features for correct SIM card orientation. A side action spring holds the SIM card in place.

Both the connector and card holder feature a card detection switch that alerts the system that the card is being inserted or removed. The detection switch also protects the card data.

487-9349 ChipSIM connector has a yellow button
670-2298 ChipSIM connector has a black button and PCB guide pegs
670-2308 ChipSIM connector has a blue button and PCB guide pegs
487-9355 ChipSIM card holder has a straight fascia
670-1210 ChipSIM card holder has an angled fascia


Features and Benefits


• Push button ejection mechanism for easy card insertion and removal
• Card detection switch
• Gold plated interface for increased durability
• Lead-in on terminals to prevent stubbing
• Locking feature on card holder prevents backout from connector
• Side action spring on card holder for polarization


Product Application Information


These ChipSIM connectors and card holders are for use in remote equipment that supports GSM, SMS and MMS technology. Applications include automotive audio and navigation, consumer point of sale terminals, smart meters, GPS, surveillance cameras and security cameras


Standards

GSM 11.11 Version 5.3.0: July 1999 Specification

Memory Card Connectors

AttributeValue
Card TypeSIM
GenderFemale
Insertion/Removal MethodPush/Push
Number of Contacts6
Number of Rows2
Pitch2.54mm
Body OrientationStraight
Mounting TypeSurface Mount
Contact MaterialPhosphor Bronze
Contact PlatingGold over Palladium Nickel
Termination MethodSolder
Housing MaterialLiquid Crystal Polymer
Length25.0mm
Width3.0mm
Depth32.2mm
Maximum Operating Temperature+85°C
Dimensions25 x 3 x 32.2mm
Minimum Operating Temperature-30°C
Series Number91228