KombiSIGN 71 643 Beacon Unit, Red Xenon, Flashing Light Effect, 230 V ac

  • RS Stock No. 455-3261
  • Mfr. Part No. 64310068
  • Manufacturer Werma
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Stacking Signal Tower - KombiSIGN 71, 70 mm, IP65

The WERMA KombiSIGN 71 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place.

Features and Benefits

• Suitable for machine and manual Andon indication
• Modular system allows a completely free combination of optical and audible signal elements
• Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system
• Completely safe element changes (contact-voltage proof) without the need for tools
• Protection rating IP65 for use in extreme conditions
• Up to 5 elements can be mounted on a terminal base
• Flexible combination of optical and audible elements
• Optical isolation due to O-ring seal stopping illumination of adjacent element
• Operating voltage for the continuous incandescent element is dependant on bulb fitted
• LED EVS elements have an extremely bright, random sequence of light to immediately grab attention
• Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness
• Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word)
• Optional self adjusting siren automatically adjusts output between 80 & 100 dB depending on ambient sound levels
• AS-Interface element can be easily connected to the networking system which considerably reduces complex wiring
• Improved connection with cage clamp technology
• Operating temperature range is -20 to +50 °C
• Polyamide body with polycarbonate lenses, 70 mm diameter

Permanent Multi-colour LED Light Element

• Seven colours in one beacon
• Different colours can be triggered via the pins in the terminal element
• Positive and negative control logic
• The three basic colours (red/yellow/green) can be triggered using only two PLC outputs
• High light intensity

Note

Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 70.

Approvals

UL listed, CSA, VDE

Specifications
Attribute Value
Range KombiSIGN 71
Series 643
Component Type Beacon
Current Type AC
Light Effect Flashing
Lens Colour Red
Bulb Type Xenon
Supply Voltage 230 V ac
Height 65mm
Base Diameter 70mm
Maximum Temperature +50°C
Minimum Temperature -20°C
IP Rating IP65
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 78.99
(exc. GST)
$ 90.84
(inc. GST)
units
Per unit
1 - 5
$78.99
6 - 11
$75.79
12 +
$74.88
Related Products
The SB150-1 electronic combined sounder beacon has been ...
Description:
The SB150-1 electronic combined sounder beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions. Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.This warning device ...
The Nightsearcher Pulsar range is a series of ...
Description:
The Nightsearcher Pulsar range is a series of rechargeable, multi mode LED warning lights. The Pulsar LED hazardous lights are small but robust, with housing made of shock resistant, waterproof (up to 10 meters) plastic. These warning lights are basically ...
A range of high performance low profile LED ...
Description:
A range of high performance low profile LED beacons offering a cost effective solution for a variety of vehicle and industrial applications that require a supplementary warning light. Two heights of beacon are available: 45mm or 95mm. Multi-Voltage (10-100Vdc or ...
The Schneider Harmony XVBC series is a visual ...
Description:
The Schneider Harmony XVBC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling.These signal towers ...