Adafruit 2305 Controller Board Controller Board for DRV2605L for Haptic Motor

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit DRV2605L Haptic Motor Controller Board

This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.

The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.

Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.

Board dimensions: 18 x 17 x 2 mm (0.7" x 0.7" x 0.1")
1.0 g

Motor Controllers & Drivers

Specifications
Attribute Value
Kit Name Controller Board
Kit Classification Controller Board
For Use With Haptic Motor
Featured Device DRV2605L
85 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 11.73
(exc. GST)
$ 13.49
(inc. GST)
units
Per unit
1 +
$11.73
Related Products
For use with the K3HB series panel meters. ...
Description:
For use with the K3HB series panel meters. Options include sensor power supply, relay and linear outputs and auxiliary input cards with functions depending on the meter chosen. These allow you to tailor the meter to your application requirements. Easy ...
The IES-ABB-ETHERNET-01, from Intelligent Embedded Solutions, is an ...
Description:
The IES-ABB-ETHERNET-01, from Intelligent Embedded Solutions, is an Ethernet interface module for alpha LCD panels. It enables the user to easily connect any Ethernet (10Base-T) network to a range of LCD modules using a CAT5 cable. The IES-ABB-ETHERNET-01 consists of ...
The EBM007 is a rotary encoder sensor module ...
Description:
The EBM007 is a rotary encoder sensor module that can create a digital pot when connected to two digital inputs of a microcontroller. This means that rotational and directional information can be obtained from the digital outputs.Benefits of the EBM007 ...
The NCV7718 is a Hex Half-Bridge Driver with ...
Description:
The NCV7718 is a Hex Half-Bridge Driver with protection features designed specifically for automotive and industrial motion control applications. The NCV7718 has independent controls and diagnostics. The device can be operated in forward, reverse, brake, and high impedance states. The ...