STMicroelectronics STEVAL-ESC001V1 STEVAL BLDC Evaluation Board for L6398, STL160NS3LLH7, STM32F303

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

STEVAL-ESC001V1 BLDC/PMSM Motor Speed Controller

The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones.

Board Features

• 72MHz STM32F303CBT7 Cortex-M4F MCU with 128KB Flash memory, 32KB RAM • 3 x L6398D High Side/Low Side MOSFET gate drivers
• 6 x STL160NS3LLH7 power MOSFETs configured as 3 x Half-Bridges
• Maximum RMS output current: 20A
• Current-sensing circuits
• Phase-sensing circuit
• Host communication: serial UART, I²C, CAN
• On-board SN65HVD230 CAN bus transceiver
• 2 x User LEDs
• Battery Eliminator Circuit (BEC) provides +5V power to R/C receiver and servomotors
• Test points for DAC, GPIOs, PWM signals, motor current feedback and CAN
• Connector for ST-LINK/V2 Program/Debug tool
• Dimensions: 29.1 x 58mm
• Designed for Field Oriented Control (FOC) in sensorless mode
• Supported by ST motor control software development kit (SDK)
• Ready to use with ST motor profiler
• 3-shunt mode supported for motor current sensing

Board Protection

• Cross conduction protection based on L6398 driver • Overcurrent and overvoltage protection feature (OCP/OVP)
• Thermal measuring and overheating protection with on-board NTC

Motor Controllers & Drivers, STMicroelectronics

Attribute Value
Kit Classification Evaluation Board
For Use With L6398, STL160NS3LLH7, STM32F303
Motor Type BLDC
21 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 74.25
(exc. GST)
$ 85.39
(inc. GST)
Per unit
1 +
Related Products
The Haptic click is an add-on board that driver ERM (Eccentric Rotating Mass) and LRA (Linear Resonant Actuator) vibration motors. A Motor Haptic Driver (Texas Instruments DRV2605L) includes a haptic-effect library with over 100 haptic effects. Audio interface (3.5 mm ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery ...
The STEVAL-IPM08B compact motor drive power board is ...
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such ...
The LB1838M is 2-channel low-voltage, low saturation voltage ...
The LB1838M is 2-channel low-voltage, low saturation voltage type bidirectional motor driver IC that is optimal for use as 2-phase stepping motor driver in printers, floppy disk drives, and cameras and other portable equipment. The output circuits are of the ...