Magnatec L298N, Brushed Motor Driver IC, 46 V 4A 15-Pin, MULTIWATT V

  • RS Stock No. 165-8002
  • Mfr. Part No. L298N
  • Manufacturer Magnatec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L298 Dual Full Bridge Motor Driver

ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

  • Operating supply voltage up to 46 V
  • Total DC current of up to 4 A
  • Low saturation voltage
  • Over-temperature protection
  • Logical "0" input voltage up to 1.5 V (high noise immunity)

What are Motor Driver IC's?

Motor Driver ICs are current amplifiers and are an essential component of motor interfacing. The motor driver integrated circuit chip acts as the interface between a microprocessor or microcontroller, and a motor. As microprocessors tend to operate at lower currents, and motors at higher, motor driver ICs are needed to supply current to the motor as needed. The RS Components range of Motor Driver ICs includes models from leading brands, in various types and configurations to support your design needs.

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Through Hole
Package Type MULTIWATT V
Maximum Operating Supply Voltage 46 V
Pin Count 15
Minimum Operating Supply Voltage 4.8 V
Width 5mm
Minimum Operating Temperature -25 °C
Height 10.7mm
Length 19.6mm
Dimensions 19.6 x 5 x 10.7mm
Maximum Operating Temperature +130 °C
150 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Tube of 25)
$ 6.655
(exc. GST)
$ 7.653
(inc. GST)
units
Per unit
Per Tube*
25 - 25
$6.655
$166.375
50 - 75
$6.40
$160.00
100 - 225
$6.05
$151.25
250 +
$5.729
$143.225
*price indicative
Related Products
A range of dedicated Stepper Motor Driver ICs ...
Description:
A range of dedicated Stepper Motor Driver ICs from Texas Instruments.
Silicon Labs Si826x range of ISOdrivers are pin-compatible ...
Description:
Silicon Labs Si826x range of ISOdrivers are pin-compatible drop-in upgrades for popular gate drive optocouplers. These devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si826x isolated gate ...
Full- or H-bridge controller/driver ICs from Infineon. These ...
Description:
Full- or H-bridge controller/driver ICs from Infineon. These devices are designed for use with DC motors or other inductive loads in automotive applications but may be used to drive a variety of other loads. Some of the ICs include an ...
BD63524AEFV is stepping motor drivers of 1/8 micro ...
Description:
BD63524AEFV is stepping motor drivers of 1/8 micro step (Eighth step) drive. As for its basic function, it is a low power consumption bipolar PWM constant current-drive driver with power supply rated voltage of 36V and rated output current (DC) ...