Wade Brass Needle Valve WVA3/B/16, 1/4in

  • RS Stock No. 262-0662
  • Mfr. Part No. WVA3/B/16
  • Manufacturer Wade
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

90° Needle Valve - Panel Mount

Bulkhead hole dia. - 9/16 in.
Bulkhead thickness (max) - 3/16 in.

//media.rs-online.com/t_line/L262066-01.gif

Standards

BS 2051

Wade Needle Valves – Compression Fittings – Brass

Brass body and spindle valves to BS2051, giving a finer control of mediums such as gases, air, oil and water. For medium pressure applications
The pressure ratings given are the maximum permissible for the valves and therefore reference should be made to the maximum working pressures for the appropriate tubing to be used. The lower pressure of the two must always be used as the safe working pressure
Sealed with Nitrile Rubber O-Rings. Operating temperature from –40 to +135°C. All have standard configuration unless stated. Tube - Tube connection for imperial O/D tubing

Wade

Specifications
Attribute Value
Compression Connection Size 1/4in
Connection Orientation Angle
Maximum Air Pressure 67bar
Maximum Liquid Pressure 200bar
Body Material Brass
On back order for despatch 02/03/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 220.12
(exc. GST)
$ 253.14
(inc. GST)
units
Per unit
1 - 5
$220.12
6 - 24
$214.62
25 - 49
$210.13
50 +
$206.76
Related Products
The Super Speedfit Acetal Single Check Valve by ...
Description:
The Super Speedfit Acetal Single Check Valve by John Guest was designed at the request of leading companies in the drinks dispense industry. The fast installation time and low headloss design ensures protection against the reversal of flow. This check ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRAS approved. Small and quiet in operation. Minimum working pressure 0.15 bar. Fits most tanks and cisterns. Manufactured from 4-ton tensile strength engineering resin to high tolerances. ...
High quality lubricated packing. Non rising stem. Can ...
Description:
High quality lubricated packing. Non rising stem. Can be re-packed under pressure. Solid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
Working Pressure:. Application : Plumbing, Water. Drain the ...
Description:
Working Pressure:. Application : Plumbing, Water. Drain the downstream or the whole line. Apply thermal or flow sensors. Apply pressure gauges. Divert the fluid to a new stream. Operating Temperature : -20゚C (-4゚F) / +170゚C (+350゚F)Operating pressure : PN16 (230 ...